May 20, 2020 at 19:52May 20, 2020
Added 4 photos to Buysell
May 16, 2020 at 15:43May 16, 2020
May 16, 2020 at 15:37May 16, 2020
Chris King Inset 8 Black headset was installed in a frame that was never built or ridden. The Inset 8 is built for 1-1/8 to 1-1/4 tapered steerer tubes and a 44mm straight headtube typically found on road, cross and gravel bikes.
Added 6 photos to Buysell
May 16, 2020 at 13:38May 16, 2020
May 16, 2020 at 13:27May 16, 2020
Jan 14, 2019 at 9:09Jan 14, 2019
Jan 14, 2019 at 9:08Jan 14, 2019
Selling my lightly used Yeti SB100 demo bike. Being one of the first to be sent out, it came with Guide RSC brakes rather than XT's and DT XM421 w/350 hubs as apposed to DT Swiss M1700 wheels. Reason for selling is to have the current listed spec demo bike. Factory 25mm spacing on steerer tube for you to personally set up for proper stem hight. Demoed maybe 6 times. All nicks are on decals or protective tape. Factory lifetime warranty included!
Jan 13, 2019 at 18:27Jan 13, 2019
Jan 13, 2019 at 18:19Jan 13, 2019
Yeti SB4.5 T-series, Med, Storm Lightly used and in great condition. The 4.5 has, you guessed it, 4.5" of travel in the rear and 140mm up front. This is a stock build but with an XTR rear derailleur as apposed to the standard XT. It has a few nicks, all of which are on the frame saver stickers of the fork decal and can be replaced to make the bike would look brand new. Fork: Fox 34 Factory 140 FIT Rear Shock: Fox Float Factory EVOL Brakes: Shimano XT with 180 and 160 rotors Shifter: Shimano XT Rear Der: Shimano XTR Cassette: XT Crank: Race Face Turbine 175 with 30 chainring H-Bars: Yeti Carbon 35 x 760 Stem: Race Face 35 x 50 Seatpost: Fox Transfer Wheels: DT Swiss XM421 rims with 350 hubs Tires: Maxxis Ardent 2.4 up front and 2.25 in the rear
Added 5 photos to Yeti-575-XO1-size-XS
Aug 28, 2017 at 22:18Aug 28, 2017