barzo

Medium intense, I'm 5'10" and ran a 70mm stem Bearings all good Shock pushed to suit vpp, works great Just serviced, new du eyelets, offset bushings at both ends Titanium bolts Shock bracket under top tube; mounting hole repositioned to lower bb/slacken front This also necessitated in having the linkage machined to prevent it from touching the swingarm at full travel. I chatted with intense about this before doing these modifications and they were happy that it wouldn't affect the frame in any structural way. The shock repositioning, offset bushings and an angleset give a brilliant ride with slack head angle and nice low bb I ran a 150mm fork; a 130 would be too low definitely, a 140 probably ok Frame shotblasted then powder coated brown/light blue Pink vinyl 'intense' laser cut I wanted something different... Few scuffs and cable rubs, see photos, and ding on underside of down tube, near bb; all usual stuff on a ridden MTB, nothing major and overall paint is very good 26" wheels Screw-in bb I ran external reverb Straight 1 1/8" steerer Any questions please ask £15 postage

Plenty of life left £23 inc p+p

Looking for a replacement CSI, my stanchions have had it. 150mm, straight steerer, dual air, tubes 282mm long, 2010 though I think 11 & 12 are the same.

not needing any chainrings or bb, just arms. no more than 170mm, standard 73mm bb.cheers

lookin for some 2.3 race bronsons ta

let us know...

not a jump frame though, something light for a chick