bikeguy4life

Alligator LY-T99 Portable Metal Melting Cable Cutter Kit Easily cut bicycle shifter/derailleur and brake cables in 3 seconds. The LY-T99 metal melting cable cutter forms a solid cable end, no more loose cable strands or frayed cable ends. No need for end caps or cable bolts after cutting. As pictured, kit is complete and includes following items: - Portable metal melting cutter - Cleaning dock - Band stop filter - Control Unit - Cleaning hand brush - Safety goggles - Cleaning rotary brush - Insulation gloves - 2ea spark protection cover - Operating manual - Shutter plastic carrying case This Portable metal melting cable cutter kit is new/unused. As pictured, carrying case has been opened, but metal melting cutter, cleaning dock, band stop filter and control unit are still packaged in factory shrink-wrap. The safety goggles, cleaning rotary brush and insulation gloves are in unopened factory bags/packaging. Kit retails for $1000+, not easy to find with limited availability. Kit listed here is ready to ship & priced $500+ less than retail! Shipping is $25 via USPS

2020 Ibis DV9 - Size Large, carbon frame with black with orange/grey highlights Purchased new winter/spring 2021 and ridden lightly through the 2023 mtb season. Very clean, well maintained and zero issues - approximately 500-700 miles of light use on Michigan XC singletrack. Aside from some minor chain rash on chainstay (pictured), bike could easily pass as new. Build highlights: - Fox Float Factory 32 Step Cast fork, 100mm, 44mm offset, handlebar mounted lockout - stanchions are clean, no chipping/scratching. Some very minor scuffing on decals and lowers - Stan's ZTR Arch S1 with Maxxis Minion DHF (29x2.3) EXO/TR front and Maxxis Ardent Race (29x2.35) 3C/MaxxSpeed/EXO/TR 120tpi rear tire, set up tubeless - Shimano Deore M6100 12 speed shifters/rear derailleur/cassette paired to a Shimano M7100 SLX crankset with 30T chainring - Shimano Deore M6100 brakes with 180mm front/160mm rear rotors - Ibis alloy 31.8mm bar and stem; Ibis 31.6mm rigid carbon seatpost; Ibis lockon grips - Cane Creek 40 headset - WTB Silverado PRO 142 Saddle - About 25lbs as pictured. Price drop on 4/25/24, asking $2450 plus $150 shipping. Bike will be shipped via BikeFlights ONLY in the continental USA. Bike is located in Traverse City MI, local pickup OK.

RockShox SID RL3 100mm Suspension Fork - Fork was taken off of a 2019 Scott Spark RC, lockout not included, but fork can be paired with the Scott Rideloc (front fork lockout only) or Twinloc (dual suspension lockout) lockout purchased from any Scott mtb dealer. - RL3 Charger damper - lockout not included. - 100mm travel - Debonair spring - 51mm offset - 15x110mm boost spacing - Tapered steering tube; 7 1/8" length - 29" wheels only, maxle included As noted above, fork came on a 2019 Scott Spark RC, the Nino bike from that model year. Used about 1 season of midwest XC mtb - not raced and not abused! Stanchions are in great shape, lowers look good too - there are 2 areas on lowers where the brake hose wore away the paint, other than that, fork is very clean. Color is a pretty cool/unique flourescent yellow that was specific to the Scott Spark from that year - would pair nicely with a black frame. Asking $300 plus flat $20 shipping in the continental USA.

Shimano SM-BB71-41 Press Fit Hollowtech II Bottom Bracket Pretty sure this is the 88.5/92mm "A" variant - the "B" variety for Shimano was for road bike use. Used, unsure of mileage, but I don't think it is that high, because this came off of a bike with a Shimano XT 2x10sp group that was upgraded to 1x11sp not long after it was purchased. This has been sitting in my parts bin since. Bearings are smooth and show no sign of wear. The plastic sleeve does have a chunk missing as noted, I'm unsure how that happened and don't think it affects performance. Free shipping in the continental USA

Shimano 38x24T 10sp MTB Chainrings 104/96 BCD Came off of a Shimano XT 10 speed crankset, I'm unsure of the mileage, but rings show very little signs of wear. Free shipping in the continental USA

Maxxis Ardent 29 x 2.4 & 2.25 Tire Set EXO/TR Casing I'm unsure what TPI these are, nothing is printed on the sidewall. I suspect they are 60TPI as I don't think these came in a 120TPI option. Selling as a set only, I'm not willing to separate. Used, but plenty of life left on them. I'm unsure of the model year/mileage, they were mounted to a set of Stan's Flow rims on my backup bike with Stans sealant for about 4-5 years & didn't see a whole lot of use. They hold air & don't have any holes/plugs, rips or tears in the sidewalls, etc. Some Stan's sealant residue in the tire/bead. The 2.25 was rear mounted, so it does show more wear than the front - in the tred picture above, it is the tire on the right. Selling because these tires are overkill for what I ride and I have swapped these out for more XC orientated/faster rolling Maxxis tires. Free shipping in the continental USA

Rock Shox Judy XC 80mm Fork for 26" Wheels - 1998 MY, for Parts/Restoration - 80mm travel, 100mm QR, for 26" wheels - 1 1/8 straight steerer with about 7 3/4" of steerer tube. - Has cantilever brake bosses and disc brake tabs THE GOOD: - Fork works/operates - still has compression and rebound, fork seals don't appear to leak. Fork has never been rebuilt/serviced. - Stanchions are clean and free from rust, scratches/gouging - Fork boots are in nice shape - pliable w/ no dry rot or cracking. - Decals are all there and are mostly in good shape THE BAD: As noted in pictures, there is chipped paint and corrosion on bottom of fork lowers and around the arch - I did some winter commuting and corrosion was caused by salted Michigan roads. I don't know if the lowers are salvageable, so I'm listing this as poor, for parts or restoration. I believe this fork is a 1998 model year fork. I bought it new from my LBS in 1999 to replace a RS Indy on my xc bike. It was used for midwest XC riding/racing until 2004 and then limited use commuting from 2004 to 2010. It's been in my parts bin since 2010. Fork didn't see heavy use - xc riding and racing with no major jumping, hits, etc. 90's Era vintage bikes seem to be getting popular, so if there is someone out there that needs parts for a build or is able to restore this one, I would be happy to get it out of my parts bin and to a good home. Asking $50 plus shipping (Continental USA only please)

Wolf Tooth 34.9mm seatpost clamp, orange. Bolt closure. New, unopened packaging, bought for a build that didn't happen. $20 shipped in the continental USA