bkoch6996

I have (1) Ergon SM Pro (pictures show two but I just sold one) - I thought this saddle was going to work for me so I bought more than one. My ass is super particular when it comes to saddles and they didn’t work so these are like new - titanium rails - small/medium (140mm wide) - 238g

Like new! Needed a wider bar. - Retails for $175 - 760mm - 9degrees backsweep, 9mm rise - 238g

2020 Niner RIP 9 RDO 29 5-Star Shimano XTR LTD enduro carbon mountain bike: - Retailed for $9100 - EXTREMELY low miles, well cared for, and like new! Only rode for one season and then was training on my race bike all the time. - Well-maintained - Fork and rear shock recently serviced - 28.4lbs Frame: Crafted from RDO (Race Day Optimized) carbon, it features a molded down tube and chainstay protection. Fork: Equipped with a FOX 36 FLOAT Factory fork, EVOL, FIT GRIP2 damper, high-speed and low-speed compression adjust, Kashima coating, 110X15mm BOOST axle, and a 44mm offset. The travel is 150mm. Rear Shock: The FOX FLOAT DPX2 Factory shock offers 3-position adjustability, EVOL technology, and Kashima coating. Its dimensions are 210x55mm. The travel is 140mm. Wheels: The DT Swiss XMC 1200 carbon wheelset with Centerlock rotor mounts. The front hub is 110x15mm Boost, and the rear hub is 148x12mm Boost. Tires: Maxxis Rekon 29" x 2.6" (front) and Maxxis Aggressor 29" x 2.5" WT (rear) Crank: Race Face Next R Carbon with a 32-tooth chainring . Bottom Bracket: Race Face, 73mm BSA threaded. Rear Derailleur: Shimano XTR M9100, 12-speed, with an SGS cage . Shifters: Shimano XTR M9100, 12-speed, I-SPEC EV clamp. Brakes: Shimano XTR M9120 4-piston brakes with 180mm Shimano MT900 Centerlock rotors. Handlebar: Race Face Next R, 800mm width, 20mm rise, 35mm bore. Saddle: Ergon SM Pro Titanium Rail 140mm Seatpost: KS LEV SI dropper 175mm (LG/XL). Stem: Race Face Turbine R, 40mm length, 35mm clamp. Grips: Ergon GA2 Headset: Niner Internal ZS, ZS44/28.6 upper, ZS56/40 lower