blakethehusky

Hello everyone! I have for sale a 2019 Pivot Trail 429 Pro XT/XTR with Upgrades. This bike has lots of upgrades including carbon handlebars with a 20mm rise, and AXS wireless drivetrain. Chain is nearly brand new and professionally maintained for the life of the bike. The bike also comes with matching stem and pedals. Let me know what questions you have! Thanks for checking it out! Here are the specs: Pivot Trail 429 XTR/XT Pro XL Rear shock - Fox Factory Float X 120mm Fork - Fox Factory 34 Grip 2 130mm Pivot Low Rise Carbon bars, 780mm width Stem - Raceface Turbine R35 40mm, 0 degree rise Shimano Deore XT 4 Piston, center lock 180mm rotors SRAM 1x12 AXS GX deraileur with Raceface 32 tooth chainring Raceface Aeffect R cranks DT Swiss M1700 rims laced to DT Swiss 350 hubs Fox Transfer 175mm Dropper post Crank Brothers Stamp 7 Large peddles Maxxis DHR II 2.4x29” Front Maxxis DHR II 2.4x29” Rear This thing is built and ready to rock! Light miles approximately 500 miles. Professionally maintained. I am 6'3'' 200lbs and have been riding a long time. This bike has a couple little paint chips but nothing that compromises the frames integrity or cosmetically unpleasing. Let me know what questions you have, this thing is mint.

This is a pimped out hightower cc XL size. I literally had this built a month ago and hurt myself at work which will require surgery. This is the CC frame, super light and in superb condition, i bought that frame lightly used. fox 36 kashima fork is in perfect condition and barely used. brand new wheels and hubs, brakes, dropper, bars, stem, entire drive train, pedals and grips. This bike has been ridden twice since built. brakes magura trail XT fox factory 36 kashima fox float DPX2 rear fork kashima coated cane creek headset 170mm-200mm PNW internally routed dropper with PNW loam lever race face carbon bars (uncut at 800mm) pnw grips sram eagle GX drivetrain dub boost (this drivetrain KICKS ASS) handbuilt brand new industry 9 hydra hubs laced to industry 9 enduro wheelset brand new maxxis minion DHF 2.4 front and rear aluminum one up component pedals brand new carbon stubby bottle cage really pains me to sell the bike so please no lowballs, i'm posting well below what i built it for. hope you enjoy, let me know if you have any questions. comparable build of new model is well over $7000 not including tax

Up for sale is my 21" Gary Fisher Trek Rumblefish Elite. Front fork has been upgraded to 140mm Fox Float 34 Kashima. Rear derailleur is Shimano XT with shadow clutch. SLX 175mm cranks. Removed front triple chainring, running 1x10 and though I'm a poor cyclist that has always been enough, even for the tougher climbs on my regular trail. Raceface bashguard. Rear break rotor has been upgraded to 180mm with ice tech rotor. Seat dropper post and nice diety flat pedals. This bike was $3400 a stock, with the fork upgrade, derailleur, pedals, dropper post, handlebars and grips add about another $2000 spent on building this bike. Built a brand new back wheel 2 years ago and only ridden half dozen times since then. Comes with newer Bontrager RL saddle (not pictured on bike but in solo photo) Probably due for a new set of tires but this would be an awesome intro trailbike. I've ridden downhill on the lifts in Utah, the rock in Moab and flowy trails in SW Colorado as well as throughout the NW. Selling because I have 2 small kids and its just sitting at my house. Get into a full suspension bike that can handle a lot at a great price!

swapped off my 2017 Santa Cruz Hightower, like new shape.