composites engineer for living, musician and rider for life.
Added 2 photos to Spitfire-Build
Sep 22, 2017 at 10:38Sep 22, 2017
Added 3 photos to HONZO-ST
Aug 9, 2017 at 13:34Aug 9, 2017
carbonone Flynhawaiian5's photo
Jul 14, 2017 at 14:30Jul 14, 2017
carbonone EvergreenBryan's article
Mar 30, 2017 at 14:58Mar 30, 2017
EvergreenMTB - Support Improved Trails in Snohomish County Washington
My family and I are constantly there walking and riding. There is a ton of potential for upgrade and reclaimed trails and very friendly folks on bikes and horses!
Jan 16, 2017 at 12:59Jan 16, 2017
Brand new Hi Volume RS Rear Shock. 7.875" (200) eye to eye and 2.25" (57mm) stroke Came on a new Banshee Spitfire that I have a coil shock for. Never ridden on. Removed when I got the frame. $250 firm. Shipping to Cont. USA NOT included in the 250. Will trade for DB inline Air or X-fusion vector HLR of same length and same condition.
Added 3 photos to Spitfire-Build
Jan 16, 2017 at 12:52Jan 16, 2017
Aug 2, 2016 at 14:33Aug 2, 2016
Good, clean 31.6 diameter Joplin dropper seat post. Just cleaned and replaced oil and re-pressurized. I am getting rid of this one since my frame is a 30.9 and I have the 30.9 as well I am keeping. About the simplest dropper on the market. Takes mud and bad stuff well. I clean it once a year and re-grease and replace the fluids then as well. Never had any problems. The remote is included and should be long enough to fit any bike with the included cable and housing. Simple setup and works well on either side of the bar. Great chance to get a REASONABLY priced dropper that will let you know whether or not you want to spend 400-500 on a new one in a few years. I bought these two several years ago and have not regretted it. You won't either. 100 plus shipping (shouldn't be much since so small)
Added 4 photos to buysell
Jul 27, 2016 at 15:41Jul 27, 2016
Jul 27, 2016 at 15:33Jul 27, 2016
Used but fully serviced DUC32 maverick fork and front wheel. Wheel maybe has 20 miles on it. I bought the wheel separate after I had the fork for a while that came with a maverick frame I had bought. The fork comes with two top crowns of medium and tall that accomodate 144mm to 172mm stack height ranges. There are couple of scratches through the paint on the fork BUT NO DENTS and NO LOWER LEG SCRATCHES. The seals and internals were rebuilt a year or so ago are working great and have 2 rides on them. I no longer have a frame that fits this fork and need to sell it to get a new fork. this fork can be updated to be a 29er with a kit availalbe (along with most parts) online. Please let me know if there are any questions. I do need bike parts so hit me up for possible trade or 250 USD takes the wheel and the fork/crowns plus shipping, A adjustable 75,85,95mm 31.8 diameter stem that bolts to upper crown is also included. Thanks Ryan
Added 3 photos to On-One-456
Jun 25, 2014 at 9:42Jun 25, 2014