chandhole

Fork and stem. Just needs a fresh service. More photos to come.

THIS, is one of the first Canadian built rough and rugged DH brawlers. Built before high pivot was all the rage, this 9” travel bike blasts over rough, square edge terrain. I have owned this bike for 7 years and updated / replaced every part on it with the exception of the crank arms, seat post and seat. I haven’t ridden it in 4 years so it needs some suspension service and new brakes. The Fox DHX 5.0 shock is buttery smooth and so is the 888 fork, although it should get some new seals and oil before hitting the trails. Main triangle is box aluminum. Rear triangle is Cro-moly. Here is some additional background on this vintage DH classic. http://www.balfa.wooyek.pl/balfa-bb7-faq-overview.html Parts List: Marzzochi 888 RV (2008) Fox DHX 5.0 Coilover 600lb spring (2011) (I think I have lighter springs to include) 780mm Answer Pro Taper AL handlebar ODI Peaty Grips Funn direct mount stem Woodman headset Juicy 7 Brakes - 203mm rotors SRAM X7 9speed shifter and derailuer Raceface DH seat post WTB Silverado seat E13 bashguard and chain guide Truvativ Hollzfeller 7075 crank arms Wellgo flat pedals Mavic 729EX rims, 26” SRAM HUGI FR hubs Vintage Maxxis Highroller FR/R tires Schwalbe Big Betty and Magic Mary included I would prefer local pickup but willing to ship at buyer’s expense. I will also charge $100 to disassemble and pack the bike. Expect shipping to be expensive given the bike weighs 46lbs and the box will be a bike box. I also have the original 2001 Marzzochi Shiver fork for sale - $500 firm in a separate post coming soon. (single photo included to illustrate Shiver on the bike)

2016 160mm Fox 36 Kashmia coated with Push Factory Tune by Suspension Werx 2016 Fox Float Kashima coated with Evol air can (150mm) 2017 Noble TR33 rims with DT Swiss 350 hubs, DT Swiss spokes Full XX1 1x11 drivetrain with carbon crank, oval 28/30 chainring and 44T One-up granny gear Multiple round and oval chainring options included 9.8 Fall Line Dropper post -125mm Raceface SixC 780mm handle bar Avid XO Trail brakes - f: 200mm r: 180mm (good pad life and spare pads included) Syncros carbon stem - 50mm Ritchey Superlogic carbon ceramic headset Maxxis DHF 2.35” front tire - new fall 2018 Maxxis Aggressor 2.35” rear tire - new fall 2018 Spare 2.35” Maxxis Highroller 2 included Setup tubeless Ergon grips Ergon SC3 carbon saddle - worn on sides in photo, new replacement WTB sadde included Straightline AMP flat pedals and CrankBros Candy 2 clipless pedals I’m sure there are some other spare parts kicking around that I will include. Bike has been well cared for. Suspension service completed Spring 2019. New Teflon shifter and dropper cables installed Spring 2019. Bike runs silently and the suspension is buttery smooth. It’s ride ready!! This is a great do it all bike dripping in carbon. Naked it weighs 27lbs. From heli-drops in the Rockies to Ontario XC races it has done it all. Normal cosmetic wear and tear is apparent. Note: this bike does not have the TwinLoc suspension switch installed but the switch mechanism is included. Buyer pays packing and shipping costs.