charlovelo

* Please note that I do not ship this item, but I can meet-up around the Laurentides - Montreal - Bromont area.* CushCore Pro set (Pair) for 27.5 wheels including valves. The kit was ridden for about 2 seasons on a DH bike so they show some pinches here and there around the circumference, but none have pierced through or damaged substantially the foam. Never had a flat with them either so never ran flat on them. Initially bought them to try and test them out and ended up hooked to the added sidewall support it gave in the corners. Selling both inserts as I will be changing bikes this year and I won't have a 27.5" in my arsenal for the next few years. Valves had a good clean down to remove sealant and valve cores are in excellent condition. The inserts were wiped off excess sealant as much as possible. They lightly stretched over time so they are easier to install than brand new, but still work as new, so it's a pretty good win-win. Do not hesitate to reach out if you have any questions! Cheers!

* Please note that I do not ship this item, but I can meet-up around the Laurentides - Montreal - Bromont area.* Medium spring, spring shaft and associated hardware taken off a 2016 RockShox Boxxer Team to be converted to World Cup/Solo Air kit. The conversion was done from out of the box and the parts were kept in the Solo-Air kit box as spare parts as a "just in case" back up. They ended up staying in the box and never getting used, so the coil kit is basically brand new and unused. The kit is compatible with Boxxer forks from 2010 to 2018 (35mm stanchion, pre-29er) with either 26in wheels or 27.5in wheels. All that is included : - Medium Boxxer spring (Red) (RockShox P/N 11.4015.380.020) - Spring shaft with sealhead (RockShox P/N 11.4015.381.000 + 11.4015.382.000) - Top cap with preload washers (RockShox P/N 11.4015.375.000 & 11.4015.376.000) - Footnut + Crush washer. Do not hesitate to reach out if you have any questions! Cheers!

* Please note that I do not ship this item, but I can meet-up around the Laurentides - Montreal - Bromont area.* Rockshox 400x3.0 coil spring with very few hours of use. It came stock on my bike's RockShox Vivid but it ended up being too stiff for my body weight. Swapped to a 350 and never used it again since. The specs : OD : 56mm ID : 38mm Overall Length : 172mm Stroke : 3.0in (76.2mm) Rate : 400 lbs/in If anything, don't hesitate to DM! Cheers!

* Please note that I do not ship this item, but I can meet-up around the Laurentides - Montreal - Bromont area.* If you are looking for a versatile chain tool tht won't break the bank, this could be the tool you are looking for! Almost brand new chain tool from Park Tool, the CT-3.3 is their latest revision of the CT-3 series. This chain tool basically work with any chain you may ever want to work on (From 1/8 and 3/16 chains up to your fancy Sram Road FlatTop chains while including Shimano and Sram 5 to 12 speed chains for mtb). Why I am selling it then? Put simply, I may have thought I lost it and bought another chain tool since then. Since I only need one, I am selling this one so it may serve someone else. As you can see in the pictures, this tool didn't see much use, so while it isn't new, it is as close as it can be. Open to reasonable offers. Don't hesitate to reach-out via PB DMs! Cheers!!

* Please note that I do not ship this item, but I can meet-up around the Laurentides - Montreal - Bromont area.* Brand new out of the box, in packaging and never installed, Santa Cruz Ø35mm OEM handlebar with 35mm rise in full 800mm width (uncut). It originally came in the part-kit for my new bike, but I already had planned another handlebar/stem set-up for my new build so I don't need this one. General specs : Width : 800mm (uncut) Clamp Ø : 35mm Rise : 35mm Backsweep : 8.5° Weight : 234g (approx) I took the bar out of the packaging for picture purpose only, the bar is currently back in its wrapping untill it gets sold! Open to offers. Don't hesitate to reach me out via PB's DMs! Cheers and ride on!