chrisg1664

Selling my Specialized Enduro S-Works top of the range model constructed from Specialized’s top carbon layup, carbon wheels and SRAM XX1 drive train Full spec as follows Size XL Enduro frame (165mm travel) Fox Float X2 kashima coated rear shock Rock Shock Lyrik forks -set to 170mm travel 29inch Roval carbon wheel set Sram carbon XX1 chain set 10-50 cassette Sram XX1 rear mech Specialized carbon handlebars 780mm wide Sram Code brakes Specialized Command dropper seat post I have owned the bike for the last 6 years. It’s been well cared for after each ride and kept fully maintained. It’s had a relatively easy life as I don’t get to ride as often as I’d like. Forks last had a lower leg service in January It has been wrapped from new but there are obviously signs of use. Damage to any paint work is purely cosmetic and not a crack in the frame. Would rather the buyer sees the bike beforehand but happy to courier at your expense if that’s not feasible. Any questions just ask and happy to send further photos.

Used shock that has been taken off a Specialised Enduro. This model is made to fit the 2017-2019 model of Enduro that only has one bolt at the bottom of the damper body rather than the usual eye. Please note this is unique to a Specialized, it will only fit the above model and year of bike. I have serviced the air can in order to sell, it hasn’t been used since. New seals throughout and fresh oil. Four volume spacers inside and I will also include another 4 that I have spare. Damper body is perfect with zero damage or scratches to it.

I am selling my YT Industries Wicked frame with Rockshox Monarch RT3 shock, Rockshox Reverb 125mm stealth seatpost and YT saddle. I have had a lot of pleasure riding this but its never really been big enough for me and Ive finally given in and got a bigger bike. Im 6'4" and it always felt a bit short for me. I think it would probably suit someone who is about 5'10"- 6'1" The frame is size large, 7005-T6 aluminium. Tapered headset and has 158mm rear travel suited to a 160mm fork. Head angle is 66 degrees I think. The shock has just been serviced and the damper body replaced. I wrapped the frame myself in heli-tape before I first rode it so there's no scuffs or scratches in the metal or paintwork. Any colour imperfections you might see in the photos are just in the tape, the frame is still pristine. I've left it on as I dont think its really worth taking it off for a future owner. I bought the bike as a whole from YT and have been really impressed by how capable it is. Its dealt with climbs and descents just as well as my friends bikes worth twice as much. Im more of a slower technical rider than a 'fast as you can trail blazer' so I wouldn't really say that the frame has been caused much stress by my riding. If you've got any questions then please ask, I can provide original proof of purchase if you want to be sure you're buying a legit frame. I can post at your expense, deliver for fuel costs within 25 miles or you can collect. Cash preferred.

Only bought six months ago but won't fit in my new frame :-( Immaculate condition. Recently serviced bearings. Below spec is copy and pasted. Steerer Tube OD: 1-1/8” to 1.5” tapered Upper head tube ID: 44mm Lower head tube ID: 55.95mm Upper head tube ream depth: 10mm Lower head tube ream depth: 15mm Fork crown seat OD: 39.8mm Upper stack height: 8.46mm Lower stack height: 4.11mm Weight: 150g

I have two rotors for sale £15 for one or £25 for them both. I have just replaced them with smaller ones as they're a little OTT for what I need them for. Still in really good condition and I'd be quite happy to still be using them myself if I'd not downsized. They're used but still pretty true and certainly don't cause any issues by catching on the pads. Come with the six bolts for mounting. Any questions just ask.