cosmic-vomit

Brand new, never ridden or mounted Maxxis Minion DHRII 29 x 2.4, Double down, MaxxTerra, tubeless ready tire. Purchased a 29 instead of a 27.5 lol. So I have no use for it. Pick up North Vancouver. No Trades.

Santa Cruz carbon riser bar, 800mm wide, 35mm rise and 35mm clamp diameter. Very lightly used (approx 5 rides). Small scruff marks from where brake levers were clamped. No crash damage. Pick up North Vancouver or can ship at buyer's expensense Canada wide.

2022 Canyon Sender CRF Underdog Mullet Very lightly used DH bike perfect for your next race machine or bike park laps. The sender features lots of adjustable geometry to fine tune your ride. Flipchip in the rear to shorten or lengthen the rear center and three position headset cups for reach adjustment. I’ll also included NSB direct mount stem spacers to adjust stack hight. Bike has been kept in great condition, serviced and maintained requaly. Fork and shock have been fully rebuilt and serviced by SRAM in June. Small paint chip on non drive side downtube and scratch on handle bar (pictured). Spec: 2022 Sender CRF frame LARGE, mullet setup (29” front wheel, 27.5” rear wheel) RockShox Boxxer Ulitmate 200mm RockShox Super Deluxe Coil Ultimate, 400lbs coil (450lbs included as well) SRAM Code RSC Rainbow brakes, Galfer pads Galfer 223mm front rotor, Galfer 203mm rear rotor SRAM GX DH 7s drivetrain Truvativ Descendant cranks 165mm, 36t SRAM chainring DT Swiss EX 471 rims, Cushcore Pro front and rear DT Swiss 350 hubs Maxxis Assegai 29x2.5, Maxgrip, DH casing front tire Maxxis Minion DHR 27.5x2.4, Maxgrip, EXO+ rear tire Burgtec Ride wide DH bars, 800mm, 35mm rise Truvativ Descendant direct mount stem Pick up North Vancouver. Can deliver in the sea to sky area for the cost of fuel.

Here is it.. 2023 S-Works Enduro S4 custom build. Brand new frame, unridden! I originally got the bike as an Expert build in late 2021, since then I have upgraded most parts on the bike and kept it in excellent working order (I work as a bike mechanic). The frame was just replaced under warranty, I have recently just built it up and it is unridden. This included a new headset, pivot bearings, hardware, and derailleur hanger. The fork and shock were fully rebuilt in Feb '23 by Suspension Werx in North Vancouver, shock has the all new revised internals from Fox, so won't be plagued with the classic X2 aeration issue. Brakes were bled (front and rear) when the new frame was installed, all fresh fluid. All scratches/damage have been included in the pictures. Derailuer has some scraps, but still works amazing, goes to show how good the XX1 AXS stuff is. Scratches on fork are cosmetic, none on the stanchions. I have a range of extras that I'll throw in with this, pivot bolt kits, headset bearings, and derailleur hangers. Spec list: Frame: 2022 S-Works Enduro S4 (unridden) Fork: Fox 38 Performance Elite 170mm Shock: Fox Float X2 Performance Elite Wheels: Industry Nine Enduro S 29", 28h Hubs: Industry Nine 1/1 Seatpost: SRAM AXS Reverb 170mm Brakes: SRAM Code RSC Rainbow Rotors: SRAM Centreline 6B - 220 front / 200 rear Derailleur: SRAM XX1 AXS Cassette: SRAM XX1 10-50t Oil slick Chain: SRAM GX Cranks: SRAM X01 Carbon 170mm Chainring: North Shore Billet 30t Saddle: Specialized Bridge 143mm Handlebars: Specialized alloy 800mm / 30mm rise Stem: OneUp 42mm Grips: Diety Knucklebusters Front tire: Maxxis Assegai, Maxgrip, EXO+, 29x2.5 (75% of tread left) - set up tubeless Rear tire: Maxxis Minion DHR II, MaxTerra, DD, 29x2.4 (55% of tread left) - set up tubeless