Block user

Recent

Added 9 photos to Specialized-Camber-29er
Apr 25, 2016 at 14:45
Apr 25, 2016
Selling
Apr 25, 2016 at 14:44
Apr 25, 2016

Specialized Camber 29er (Just serviced with new parts)

$800 GBP
Sadly it's time to sell my Specialized Camber 29er 2014 bike. I have injured my foot playing football, been told not to do any extreme sports until the damage has fully healed, meaning I cannot use this bike for its purpose! I have just recently serviced the bike, within the service I have changed the following parts; headset bearings, cranks, bottom bracket, chain, cassette and both inner gear cables. Since the service the bike has only been ridden once!! Spec as follows: FRAME: M5 hydroformed tubing, 29" geometry, tapered headtube, internal Command Post BlackLite routing, 142mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, bolt-on cable guides, 110mm travel REAR SHOCK: X-Fusion O2 RL, air adjustment, lockout and rebound adjustment, 197x48mm FORK: Rockshox Recon 29", air adjustment, tapered alloy steerer, lockout and rebound adjustment, 110mm travel, 15mm bolt through maxle (these are brand new, the original forks had a massive air leak, so had to be changed) HEADSET: 1-1/8 and 1-1/2" threadless, Campy style upper with 1-1/2" lower, cartridge bearings (these bearings were replaced when I replaced the forks) STEM: Specialized Trail, 6061 alloy, 4-bolt, 8-degree rise, 31.8mm clamp HANDLEBARS: Specialized XC Mini-Riser, 6000 butted alloy, 720mm wide, 10mm rise, 10-degree backsweep, 6-degree upsweep, 31.8mm GRIPS: Unbranded anodised red lock-on FRONT BRAKE: Tektro Draco 2, ceramic pads, Light Wave rotor, S/M: 180mm, Others: 200mm rotor (recently been bled) REAR BRAKE: Tektro Draco 2, ceramic pads, Light Wave rotor, S/M: 160mm, Others: 180mm rotor (recently been bled) FRONT DERAILLEUR: Shimano SLX M660, E-type for DMD, top-swing, bottom pull REAR DERAILLEUR: Shimano Deore Shadow M592, 9-speed, SGS long cage SHIFT LEVERS: Shimano Alivio, 9-speed, trigger CASSETTE: Shimano HG-20, 9-speed, 11-34 (brand new, changed when serviced due to wear) CHAIN: KMC X9, 9-speed, nickel plate, reusable Missing Link (brand new, changed when serviced due to wear) CRANKSET: Shimano Alivio, Octalink spline, replaceable rings, S: 170mm, Others: 175mm (brand new, changed when serviced due to wear) BOTTOM BRACKET: Shimano BB-ES25, Octalink spline, cartridge bearings, 73mm shell (brand new, changed when serviced due to wear) RIMS: Specialized, alloy disc, 24mm wide, 32h FRONT HUB: Shimano 15mm bolt through, sealed cartridge bearings, 32h, maxle (hub was changed with the forks due to the axel been a different fitting) REAR HUB: Specialized disc, 4x-sealed cartridge bearings, 12mm thru-axle, 142mm spacing, 32h SPOKES: DT Swiss, 2.0mm FRONT TYRE: Specialized Ground Control, 2Bliss Ready, 29x2.3", foldable aramid bead, 60TPI REAR TYRE: Specialized Ground Control, 2Bliss Ready, 29x2.1", foldable aramid bead, 60 TPI SADDLE: Geometry Rival, 143mm width (has a slight rip on the back of the saddle) SEATPOST: Specialized 6061 alloy, 2-bolt micro-adjust setback, 30.9mm, S/M:350mm, others:400mm SEAT BINDER: 7050 hard anodised alloy collar, QR, 34.9mm Can post anywhere in the UK for £23.50, 24 hour courier, can be delivered on a day of your choice. Collection is also okay if you would like to view the bike first. Any questions please feel free to ask me.

Added 12 photos to Yeti-SB66
Apr 25, 2016 at 14:32
Apr 25, 2016
Selling
Apr 25, 2016 at 14:28
Apr 25, 2016

Yeti SB66 Custom; Fox, Hope, Mavic, RockShox, Raceface

$2300 GBP
Here I have my Yeti SB66 2013 fully custom enduro bike for sale. Sadly I have done damage to my foot playing football, meaning I have to take a step back from mountain biking, hence the sale. I will be very sad to see this go, only ridden on the bike once since it has been built up, covering only around 40 miles. Everything is working perfectly well, couldn't be set up to a higher standard! Spec as follows: Frame: Yeti SB66 2014 X-Large 20.5” 152mm travel (Bought from 'TheProsCloset used in December with paperwork) Shock: Fox Float CTD Boost Valve Kashima (Recent seal and oil service, came with frame) Forks: Fox 34 Float CTD Kashima 160mm Travel 15mm Quick Release (Recent seal and oil service, came with frame) Headset: Hope Tapered Integral ZS44 - ZS56 Headset (Bought in December new, with paperwork) Seat Post: RockShox Reverb 125mm Drop 30.9 (Bought black Friday) Seat: SDG Ti-Fly Storm (Bought in January, with paperwork) Seat Clamp: Hope Dropper Seat Clamp 34.9 (Bought in December, with paperwork) Bottom Bracket: Shimano Saint HollowTech 2 (From old bike, no issues) Cranks: Shimano Hone HollowTech 2 170mm (From old bike, no issues) Pedals: Superstar Flat Pedals (From old bike, no issues) Chainring: Raceface Narrow Wide 30 tooth (Bought in January, with paperwork) Chainring Bolts: E-Thirteen Aluminium Bolts (Bought in January, no paperwork) Stem: Hope Downhill Stem 50mm (Bought in January, with paperwork) Top Cap: Hope Top Cap (Came with headset, new) Handlebars: Sunline V1 765mm (From old bike, no issues) Grips: Funn Lock On (From old bike, no issues) Brakes: Hope M4 Black Edition Braided Hoses Superstar Brake Pads Purple Leaver Adjusters (From old bike, have just had a new set of pads, front and rear, and also a bleed) Disks: Hope Floating Rotors Rear 180mm Front 203mm (Came with brakes) Rear Hub: Hope Pro 4 32 Hole 142mm x 12mm Quick Release (Bought in March, with paperwork) Front Hub: Hope Pro 4 32 Hole 15mm Quick Release (Bought in March, with paperwork) Spokes: DT Swiss Champion Black Spokes (Bought in March, no paperwork, had to buy these for my wheel build) Rims: Mavic EX729 26” Rims Tubeless Ready (Bought in September, with paperwork) Front Tyre: Maxxis Minion DHF 3C EXO Tubeless (Bought in February, with paperwork, loads of wear left( Rear Tyre: Maxxis Minion DHR2 3C EXO Tubeless (Bought in February, with paperwork, loads of wear left( Tubeless Kit: Stans NoTubes Tape Sealant And Valve Kit (Bought in February, with paperwork, loads of wear left( Chain: KMC 11 Speed Chain Gold (Bought in March, with paperwork) Cassette: Shimano XT 11 Speed Cassette 10-40t (Bought in March, with paperwork) Rear Mech: Shimano XTR Shadow 11 Speed Mech Medium Cage With Clutch (Bought in March, with paperwork) Rear Shifter: Shimano XTR 11 Speed Shifter (Bought in March, with paperwork) As you can see the bike is worth a lot more than my asking price!! Any questions please message me. If you would like this posted please get in touch with me, the postage fee is £23.50. 24 hour courier, or pick a date in mind that suits you the best. Thanks for your interest!

Selling
Apr 25, 2016 at 14:13
Apr 25, 2016
Added 7 photos to Stuff-to-sell
Jan 14, 2016 at 5:30
Jan 14, 2016
Selling
Jan 14, 2016 at 5:27
Jan 14, 2016
Added 10 photos to Specilized-Camber-Comp
Jan 3, 2016 at 10:46
Jan 3, 2016
Selling
Jan 3, 2016 at 10:38
Jan 3, 2016

Specialized Camber, Hope Seatclamp, Seatpost, Headset

$300 GBP
Selling this due to recently purchasing a Yeti SB66 to build a enduro bike. I've owned this from new and has been well looked after/serviced the past few years. Just had a new shock and bearings changed last June! The bike does have a few minor scuffs, but no dents or cracks! Can deliver anywhere in the UK for £20 Cash on collection or PayPal if you're wanting it posted... Frame: Specialised Camber Comp Medium 2010 Shock: Rockshox Monarch RT 2014 Seat clamp: Hope quick release Seatpost: XLC Headset: FSA Orbit Any questions please inbox me, thanks!

Added 5 photos to Stuff-to-sell
Oct 20, 2015 at 14:01
Oct 20, 2015
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.041915
Mobile Version of Website