Pinkbike.com
Powered by Outside
danelectro987
- Member since Oct 10, 2014
- Male / 34
-
Durango , Colorado - 4 Followers
- 0 Trailforks Points
Recent
Selling
Aug 4, 2023 at 15:30
Aug 4, 2023
Hirondelle Raplee Titanium Gravel Bike 54.5cm Ultegra
$4500 USDListed is a Hirondelle Raplee gravel bike, in excellent condition. It was built as a test bike to help confirm the model's geometry and details, it has seen only approximately 10 rides. It has a few scratches and scuffs typical of use, handling, storage, etc., but is in excellent condition. The frame is not the stock geometry (it was custom built for the rider), but is approximately a 54.5cm:
- seat tube is 51cm ctt,
- effective top tube is 54.5cm,
- head tube is 160mm,
- BB drop is 75mm,
- HT angle is 71.5deg
- ST angle is 73deg
- Chainstays are 430mm
- Tire clearance is 45c for some tires, currently has 43c
- The Raplee model's product page can be found here: https://www.hirondellebicycleco.com/raplee
It also got a custom anodized finish from Agave Finishworks, the finish is based on the stamped tin pattern of a 19th century steamer trunk and it has color matched stem, seat post, and seat collar.
The build includes a Shimano RX group, Rolf Hyalite wheels, White Industries crank and headset, and Juniper ti stem, collar, and post. It has all seen low miles so everything's function is in top condition.
Please don't hesitate to send a message if you've got any questions. Thanks for looking!
Selling
Dec 13, 2021 at 8:57
Dec 13, 2021
Yeti SB4.5 Turq Mountain Bike w/XX1, Enve, Kashima
$6300 USDListed is a Yeti SB4.5 mountain bike, size large, in excellent condition. It was a top shelf build when new, and rides very nicely. The build includes XX1 shifter/chain/cassette/derailleur, DT 240 hubs, Enve rims, RaceFace carbon cranks/handlebar, and Kashima Factory fork/seatpost/shock.
It has been carefully maintained and has been prepped for sale: the fork has been serviced and the rear brake rebuilt by San Juan Cycles, the rear shock rebuilt by Fox, the suspension has been taken apart and cleaned/InfinitiLink greased, and the drivetrain removed and cleaned. The front tire has ~3 rides on it, the rear tire is new.
Pedals are not included. The rear derailleur does have some scratches (pictured). The frame and components show mild scratches, clear coat chips, and rubs typical of use, but has no damage and looks clean and sharp.
Please inspect the images for detail. I can ship within the contiguous United States, postage cost added. Please message me with questions, thanks for looking!
Selling
Feb 1, 2020 at 7:23
Feb 1, 2020
Moots PsychloX Frame w/Custom Anodized Finish
$2599 USDListed is a Moots PsychloX cross bike, with a custom anodized finish based on the 1990s Grove Innovations mountain bike graphics. It is a custom geometry with a 55cm ctc top tube, at 52cm ctc seat tube, and a 150mm head tube, and is slightly more relaxed than the stock PXRSL for gravel riding. The rear axle standard is 130mm QR, the bottom bracket is 68mm English threaded, the seatpost diameter is 30.9mm, and the head tube is 44mm.
This frame was made in 2019 and ridden for about a season, kept indoors, and treated very carefully. It has a few light marks indicating use and some light cable housing rub on both sides of the head tube and on the seat tube where the rear derailleur cable touched the frame. There is some light tire rub inside the chainstays, and may be minor marks elsewhere from normal use. The finish looks very fresh overall.
The seatpost is not available for sale, but all else pictured is included. Please inspect the images for detail, message me with any questions. Thanks for looking!
Selling
Nov 18, 2019 at 18:21
Nov 18, 2019
Moots Mooto X RSL Large w/Custom Anodized Finish
$6000 USDSelling my Moots MootoX RSL mountain bike, with a custom anodized finish. It is size large with stock geometry: the seat tube measures 19" ctt, top tube measures 23.5"ctc, and top tube effective measures ~24.5"ctc. This was used as a secondary bike, and was not ridden regularly. It saw 12-15 rides of ~9mi, with one longer 40 mile ride. That said, it has seen low miles and has been treated very well. This was ordered in the spring of 2019. The build kit includes:
- Fox 32 Factory SC Stepcast Fork, 100mm
- White Industries Headset
- White Industries Crankset
- Whiskey Carbon Handlebar
- Full XTR Group
- XTR Brakes
- Fox Transfer Dropper w/Kashima coat, 150mm
- Rolf Ralos wheelset with White Industries hubs
The bike is in excellent shape. It shows typical minor wear, such as small chips in the chainstay from chainslap and light rub on the headtube from cable housing. There is one more notable blemish: a long line of rub on the finish on the drive side downtube ahead of the Moots Logo (pictured) from contact with a tire on a long car ride. Otherwise, some small scratches and marks can be found with scrutiny, but the bike looks brilliant overall.
The bike is in perfect shape mechanically, and rides beautifully. Please message me with any questions, thanks for looking!
61,562 views
