danny4383

In good condition. 30.9mm x 400mm.

This is a World Force black diamond rim laced to Hope Bigun hub. The rim has a few marks but is straight. A few of the spokes have the odd little bend in them but it doesn't effect the wheel. The hub is in very good condition. It comes with a brand new never fitted 20mm conversion kit (new bearings, cups and axle insert) The tyre is Specialized and has plenty of tread left on it but the cords are showing through the sidewall in a few places so would probably be best to replace it. The 165mm disc is included too.

I just removed this from a wheel that I bought. It is in good condition £10 posted.

This is a front lever in very good condition. It does not come with a reservoir cap so you would need a new one.

I took these off a Bighit that I used to have as I upgraded to some Hope m4's They work well and have life left in the pads and are bled up ready to use. They come with the brake adaptors shown in the pics, the front is for a 203mm rotor I think and the rear is either for a 165mm or 185mm rotor but I can't remember which for sure as I don't have the bike anymore. No discs are included in the sale. I had to saw a groove into the bolts on the levers that hold them to the bars and use a flat headed screwdriver to remove them as the previous owner had rounded the bolt holes!

I don't really want to do this but I'm starting a new job in London next month and I need some cash for the move so this might have to go! The spec is as follows: - Commencal Supreme 6.30 frame (2006/07) - Fox DHX 5.0 Air shock with pro pedal. I've literally just got this back from Mojo who serviced it for me and I haven't ridden the bike with it on yet! - Brand new FSA pig DH pro headset (not ridden bike since fitted) - Rock Shox Boxxer U-turn forks in very good condition (few scratches on lowers but that's all) Think they are 2006/07 model. - Funn direct mount stem for oversize bars (as good as brand new) - Oversize Specialized Bighit bars - Red Yeti grips - Sram rocket shifter (f+r) - Shimano XT front and rear mechs - Goodridge braided gear cables front and rear - Hope mono M4 front brake with braided hose (could do with bleeding) - Hope M4 old style rear caliper (2 piece caliper) needs bleeding but in very good condition. Has braided hose also. - 203mm rotors front and rear - Singletrack front rim with a red Reverse hub - Mavic 321 rear rim with old style red Hope bigun hub in very good condition - Raceface Evolve DH cranks and Raceface BB - 3 ring setup on the front with a Blackspire bigring protector in perfect condition (no marks at all!) - DMR V8 pedals in near new condition - Bontrager seatpost, Specialized QR clamp and brand new Charge Spoon saddle. - Comes with spare rear dropouts to convert frame to a 20mm through axle at the rear - Also comes with the silver headtube insert which sets the head angle at 0 degrees, currently running the gold sleeve that allows +/- 1 degree angle Since building this bike up I haven't actually had chance to ride it yet but as I said it looks like it will have to go! I'm open to offers on this and might swap for a cheaper full sus XC bike with cash my way but would prefer a straight sale ideally. If you have any questions just drop me a message and I'll get back to you. The bike is in Harrogate, North Yorks at the moment but will be coming with me to North London at the end of September if it hasn't sold by then. Thanks for looking.