dawsonsennes

For sale is my 2024 Stumpjumper EVO Alloy LTD. This thing is incredibly capable on the downhill. I bought this in August of 2024, and rode it about 30 times since then. I am selling it because I have a new Epic that suits my needs better. As far as the bike's condition goes, there are a few scratches here and there, and I have included pictures of all of them. Mechanically, it is running perfectly. Below is the list of components which I copy and pasted from the Specialized website, making edits to the things I swapped out: Frame - M5 Alloy chassis and rear-end, asymmetrical design, 29" Trail Geometry with S-Sizing, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel Seat Binder - Alloy, 38.6mm SWAT - SWAT™ Door integration Rear Shock - FOX FLOAT X Factory, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSC adjustment, 210x55mm Fork - FOX FLOAT 36 Factory, GRIP2 damper, 15x110mm, 44mm offset, 160mm of travel Front Brake - SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm Rear Brake - SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm Shift Levers - SRAM GX Eagle AXS Controller Rear Derailleur - SRAM GX Eagle AXS Cassette - SRAM XG-1295 Eagle, 10-52t Chain - SRAM GX Eagle, 12-speed Crankset - SRAM GX Eagle, DUB 170mm Chainring - 32T Bottom Bracket - SRAM DUB, BSA 73mm, Threaded Rims - Roval Traverse 29 Alloy, 30mm inner width, hand-built, 2Bliss Ready Front Hub - Roval, sealed cartridge bearings, 15x110mm spacing, 28h Rear Hub - Roval DT Swiss 370, Ratchet LN, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h Spokes - DT Swiss Competition Race Front Tire - Maxxis Minion DHF 29 x 2.3" Rear Tire - Maxxis Minion DHR 29 x 2.3" Stem - Alloy Trail Stem, 35mm bar bore Handlebars - Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm width Grips - Deity Lockjaw, Black Saddle - Bridge Comp, Hollow Cr-mo rails 155/143 SeatPost - X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SLR LE lever, 34.9, 150mm

This Santa Cruz Chameleon was my cross country race bike for two years, and I am selling it as I no longer need it. It was used primarily for races and time trials, and I rode it occasionaly for longer endurance rides. Besides the cosmetic scratches, this bike is in excellent condition and is very dialed. With no creaks or rattles, it's very satisfying to ride. Weighing only 25.4 pounds, this chameleon is efficient on the climbs whilst also very capable on most descents because of the 130 mm fork. I am sad to be selling this but I would not be riding it enough to justify owning it. Below are the specs. 2020 Chameleon C S Frame Fox 34 Performance Hayes Dominion A2 brakes DT Swiss 350 hubs Raceface Arc 27 offset rims (29in) 170 mm e*thirteen dropper post PNW Loam dropper lever (best lever there is) Yeti 7330 Carbon Bars Full SRAM GX drivetrain Maxxis Aspen 2.2, Maxxis Ikon 2.2 (both tubeless) Bottle cage and pedals not included. Buyer pays for shipping