daynedewan

Excellent condition 2019 Kona Process 153 27.5" CR medium with upgrades. Work at a shop and have kept this bike in great condition since purchase in August of 2019. Upgraded the bars to carbon raceface SixC's at 780mm, brakes have been upgraded to Guide RSC's, the cranks have been upgraded to carbon descendants, and threw a very purple Deity copperhead 35mm stem on there. The frame has been wrapped with RideWrap since purchase so very few minor scratches and no major scratches (wrap is still on). The rims have taken some damage and are the most beat up component yet they still run true and work just fine, just some dings in them. Full Part List: https://2019.konaworld.com/process_153_cr_275.cfm Recent service: Rear shock rebuild Front fork service (lower leg) Cleaned drive chain Brake bleed (Front and rear) notes: seat creaks, i don't know why but it works fine bike handles bike parks greatly Minion DHF 2.3 in front Aggressor 2.5 Double down in rear pedals not included garmin mount not included

A 1x11 2015 Kona Process 153 M. Used for 2.5 years, but received plenty of love. I work at a bike shop so this thing received more than enough maintenance, in fact here are some recent upgrades I have done since getting a new bike. Completely replaced rear shock with a freshly rebuilt Monarch RC3+, installed hardly used Guide R brakes from my new bike (upgraded to RSCs after two weeks ~6 rides), replaced fork seals, new dropper lever and cable, and a new derailleur cable. Although the frame has some scratches, this thing is running great. The rims are mixed matched which happened during the 1x11 conversion, but both are in good shape and hold true well. The rear tire (aggressor) has plenty of life, but the front (e-thirteen all terrain) only has ~75 miles left on it. Everything else on the bike is running great and has plenty of life. Feel free to ask any questions! Drivetrain: SRAM GX Brakes: SRAM Guide R Fork: RockShox Pike RC Solo Air 160mm QR15 Tapered Rear Shock: Monarch RC3+ Size: Medium