deucelee

Good working and condition Fox Factory 36 with ACS3 Spring setup with Black Springs. You can easily swap out the springs to something that fix your weight better. If you're not familiar, the PUSH kit is a $400 kit on top of the $900 factory fork. It's cut to 6 7/8 but for most modern bikes, it's more than plenty. I had to use a couple large spacers for my Cassidy. It's 170mm travel and can be used for 27.5 or 29ers. I had 29er wheels on them. No scratches on the stanchions. Please see pics for yourself. https://www.pushindustries.com/products/acs3-fork-coil-conversion-kit

DT Swiss M1700 Spline 30 Super Boost 29" Wheelset. 28 hole. For use with XD cassette DT-350 hubs with upgraded 54T ratchet. Centerlock rotor attachment. 110 boost front and 157mm super boost rear hub spacing. 30mm inner width alloy rims. Was set up tubeless and held air very well! Wheels are straight . Shipping will vary depending on location.

This is pictures of the whole bike but I'm going to try to sell just the frame OR the whole bike. Whichever sells first, I will take down the ad for the other. If I sell the frame first, I will take the parts off the frame and sell the frame as is. To be clear, this ad is for just the FRAME. I will put a seperate ad for the whole bike. Frame has ride wrap all over it. I've written probably a mile max on it since the build. Why am I selling it? (1) I'm 5'4", size small is usually for folks 5'3" to 5'6" or so. This bike is actually designed for 5'5" to 5'8" as mentioned by Salsa. I didn't realize this when I first purchased the frame. That's why I don't think it's a traditional "SMALL". It seems more like a Medium'ish small. (2) This Enduro bike is too much bike for central Wisconsin. Definitely way overkill. I should have realized this before I did this build. MRSP was $3,800. https://www.salsacycles.com/bikes/2021_cassidy_carbon_frame Ridewrap is $100 plus all the labor to install it. Comes with Fox Float X2 Factory shock. Message me for shipping quotes depending on where you are. thanks.