dh-ross

Selling my commencal due to getting another bike and not having room for three bikes and all my other stuff! Spec list is below, I'm open to reasonable offers as I need it sold ASAP, but please no low ball offers, it's seen about 4 months of use and the shock even less than that and that alone was 570£, thanks! Frame: commy v4 size large, new bearings all round Forks: 2016 manitou dorado expert recent service Shock: float x2 just back from warranty full service new bushes Seat and seatpost: commencal post and saline italia seat Bars and steam: brand new renthal 40mm rise fat bar alloy and nukeproof 45mm stem Grips: new imprint grips Shifter: brand new Saint Cassette: xo1 dh 10-24 tooth Mech: Custom short cage xtr mech with clutch Brakes: code calipers on guide rs levers fresh bleed and pads (not in pics) Wheels: crank brothers opuim Tyers: new shorty up front new high roller 2 out back both 3c dh casing Cranks: Saint m810 New bb Chainguide: Gamut guide New headset bearings also fitted, the pedals in the picture can be included for a little extra, burgtec custom one offs with ti axles, any questions pm or text 07535645387 bike can be viewed in Glasgow edinbrugh or borders area thanks

Hi selling my almost new deemax ultimate wheels, rear 20x157/150, front 20mm, can choose between a SRAM xd freehub (+40£) or shimano freehub, three small marks from transport but otherwise mint, no dings or dents and bearings roll like new as they should do, tyers can be included for a little extra and are setup tubeless, paid 790£ Then another 70£ for the xd freehub not long ago grab a bargain thanks

Hi, selling my commencal v4 dh frame with fox float x2 shock, the shock has just come back from mojo with warranty work and a service carried out, all bearings replaced so it really is running as good as new and looks like it also, size large I found the geometry spot on and I'm 6'1, included is the headset bb and some spare bits and bobs such as bearings, I will swap for a 650 enduro bike or good frame and forks, please no junk, I'm willing to add cash for the right deal, thanks ALSO AVALIBLE AS FULL BIKE PLEASE SEE OTHER ADVERT FOR SPEC

High roller 2 and shorty, both 27.5x2.4 dh casing and 3c compound, only done two runs then removed, can post at buyers cost, tread like new and ran tubeless no issues thanks

Selling my opuim wheels, front is good condition one tiny ding, rear has a few dings and a small flat spot, both wheels spin true and have had all bearings replaced and spokes tensioned at a local bike shop, read 150 x 12 front 20mm, rear hub has SRAM xd freehub thanks

Hope pro 2 on dt Swiss rear wheel, 150/12 or 157, SRAM xd driver cassette not included!, Tim has small flat spot and 2 dings, Runs true and still hold air tubeless, cheers

Selling my brand new double barrel, removed from a new frameset has never been compressed, comes with mounting hardware and a 450 steel Spring, selling online for 579£ grab a bargin thanks