dredmayne99

Here is my 2016 S Works Enduro. This is one of the most capable bikes I have ever ridden, it really is a 'do it all' bike. Due to an injury at the start of April my enduro has had almost no use in the past half a year. This has contributed to this sale as well as a recent purchase. As you would expect there are the usual scuffs and marks of a used mountain bike but no cracks or dents. Fork stanchions are perfect and the bike was invisiframed from new. Spec is as follows: FACT IS-X 11m carbon fibre S Works frame with M5 alloy rear end Fox 36 Kashima coated forks (160mm) Fox X2 Kashima coated rear shock (160mm) Mavic Crossmax Pro wheelset Sram GX 11 speed drivetrain with Sram XX1 Carbon cranks Shimano XT brakes Specialized Command dropper seatpost Renthal Fatbar carbon handlerbars with hope 40mm stem My enduro has recently had completely new frame bearings, headset bearings and a fork service. All done at my local bikeshop Hot Pursuit Cycles. I've also put on some Specialized Butcher 2.3's which are just two rides old. Any questions feel free to pop me a message. Thanks, Dan

Hi, Here I have my 2014 Saracen Ariel 162. This bike has been a pleasure to own and am only selling because I want to put the money towards a downhill bike for racing. I'll be sad to see it go but I feel it is the best option for me. The bike has some cosmetic damage on the frame but no dents or cracks. I have changed some of the bikes components which I will state in the specs. The spec is as follows: Frame: Ariel custom butted headset running on 30mm main pivot cartridge bearings and 15mm Norglide linkage bushings ( bearings were replaced 10 months ago for new bearings, main bearings were upgraded for more robust bearings). Bearing replacement came to £86.20. Frame is 160mm travel. Forks: Fox 34 Float F Fit CTD R Kashima 160mm Shock: Fox Float-A Factory CTD Kashima The CTD system is run remotely from the handle bars, so you can change the setting of the forks and shock in sync with the flick of a lever. Headset: FSA Gravity XX Stem: KORE Durox 60mm, 31.8 mm clamp Bars: Nukeproof Warhead 760 mm. (6 months old) Seat post: KORE Twin Rail Rear mech: Shimano SLX shadow +. (6 months old) Cassette: Shimano SLX 11-34T (6 months old) Chainring: Raceface Narrow-Wide 32T. (6months old) Cranks: Shimano SLX Shifter: Shimao Zee 10 speed (6 months old) Pedals: Nukeproof Electron (3 months old) Brakes: Hayes Stroker Brake discs: SRAM Centreline 180mm front and rear (1 month old) Rims: Sun Inferno 27 Black 32 hole Hubs: Formula Sealed bearing Black 32 hole front 20mm axle, rear 12mm axle Tyres: Continental Rubber Queen 2.2 (front). Maxis High Roller 2.35 (rear) The tyre size may seem odd but the front and rear tyre are actually the same width. Thanks for reading and if you are interested please contact me. Cheers, Dan