edim

Selling custom 3D printed fender/mud guards for the Fox 34 SL. Precision fit with bolt-on convenience and security. No rub, no rattle, no zip ties. Printed in carbon fiber reinforced polypropylene, lightweight (~60g) and highly impact resistant. Includes high quality 316 Stainless Steel hardware. Made to order, customization available. Just ask.

*Designed Specifically for the 2022-2025 Fox 34* This is not your typical zip tie mud guard. Explicitly designed for full coverage with bolt on convenience and security. No rattles, no squeaks, no rub. Just exceptional protection for sensitive fork stanchions, seals and eyes. Features: - Precision 3D Printed – Designed around the exact geometry of the MY '22-'25 Fox 34 - Protects seals and stanchions from spray and debris - Helps protect fork internals - Trail-Ready Durability – Printed in flexible, high-impact, UV-resistant material - Clean, Integrated Look – No floppy universal fit - Easy Installation – Secure mounting with HARDWARE INCLUDED - It keeps mud, dust, sand, and grit off your face and stanchions Specs: - Compatible with: 2022-2025 Fox 34 (Does NOT fit the pre-2022 Fox 34 or any other fork!) - Manufacturing: High-quality 3D print - Material: Durable, flexible, impact-resistant polymer - Finish: Matte textured - Weight: Approx. 100g with hardware Installation: - Simple bolt-on installation using existing fork mounting points. - No zip ties. No trimming. No guesswork. *Includes Hardware* Why Buy From Us?: - Designed and printed in Petaluma, California in small batches with attention to detail. Each fender is inspected before shipping. - This is a purpose-built part — not mass-produced, not generic.

Designed Specifically for the Fox 34 SL This is not a generic zip-tie mud flap. This fender is custom designed to fit the Fox 34SL fork with a clean, integrated look that follows the fork arch and lowers perfectly. The result: better coverage, better aesthetics, and zero bulky overhang. If you’re running a 34SL on your XC or downcountry build, you already care about weight and performance. Your fender should match that standard. Why This Fender? - Precision 3D Printed – Designed around the exact geometry of the Fox 34SL - Reduces spray onto seals and stanchions - Helps protect fork internals - Trail-Ready Durability – Printed in high-impact, UV-resistant material - Clean, Integrated Look – No floppy universal fit - Easy Installation – Secure mounting *Includes Hardware* - It keeps mud, sand, and grit off your face and stanchions without compromising the clean lines of your bike. Specs: - Compatible with: 2026+ Fox 34SL - Manufacturing: High-quality 3D print - Material: Durable, impact-resistant polypropylene - same stuff as the OEM Fox and Rockshox fenders. Nearly indestructible - Finish: Matte textured - Weight: Approx. 100g with hardware Installation: - Simple bolt-on installation using existing fork mounting points. - No zip ties. No trimming. No guesswork. *Includes Hardware* Who This Is For: - XC racers - Downcountry riders - Riders building lightweight dream bikes - Anyone running a Fox 34SL who hates universal fenders Why Buy From Us?: - Designed and printed in Petaluma, California in small batches with attention to detail. Each fender is inspected before shipping. - This is a purpose-built part — not mass-produced, not generic. Includes mounting hardware. Backed by a 1-year breakage warranty—if it fails, I’ll replace it. You just cover shipping.

Selling custom 3D printed fender/mud guards for the Fox 34 SL. Precision fit with bolt-on convenience and security. No rub, no rattle, no zip ties. Printed in carbon fiber reinforced polypropylene, lightweight (~60g) and highly impact resistant. Includes high quality 316 Stainless Steel hardware. Made to order, customization available. Just ask.

*Designed Specifically for the 2022-2025 Fox 34* This is not your typical zip tie mud guard. Explicitly designed for full coverage with bolt on convenience and security. No rattles, no squeaks, no rub. Just exceptional protection for sensitive fork stanchions, seals and eyes. Features: - Precision 3D Printed – Designed around the exact geometry of the MY '22-'25 Fox 34 - Protects seals and stanchions from spray and debris - Helps protect fork internals - Trail-Ready Durability – Printed in flexible, high-impact, UV-resistant material - Clean, Integrated Look – No floppy universal fit - Easy Installation – Secure mounting with HARDWARE INCLUDED - It keeps mud, dust, sand, and grit off your face and stanchions Specs: - Compatible with: 2022-2025 Fox 34 (Does NOT fit the pre-2022 Fox 34 or any other fork!) - Manufacturing: High-quality 3D print - Material: Durable, flexible, impact-resistant polymer - Finish: Matte textured - Weight: Approx. 100g with hardware Installation: - Simple bolt-on installation using existing fork mounting points. - No zip ties. No trimming. No guesswork. *Includes Hardware* Why Buy From Us?: - Designed and printed in Petaluma, California in small batches with attention to detail. Each fender is inspected before shipping. - This is a purpose-built part — not mass-produced, not generic.