funbus

2021 model year but purchased in 2022. Forks have been used for one alps holiday and then have been sat in storage. (Used for a total of about 15 rides) as you can see in the photos they are in excellent condition. Forks have just had a full service at silverfish UK and service invoice included Forks come with bolt on RRP mudguard Steerer is 175mm 44mm offset 15x110 2021 Factory Series 38 FLOAT 29 180 Grip Part number: 910-20-888 Description: 2021, 38, K, FLOAT, 29in, F-S, 180, Grip 2, HSC, LSC, HSR, LSR, Shiny Orange, Black/Clear Logo, 15QRx110, 1.5 T, 58HT, 44mm Rake

2018 YT Industries Capra CF (CARBON) - 27.5 - large - STORM GREY / BLACK MAGIC Immaculate condition - many parts unused - 4 days use only Fully Invisiframe'd including fork Comes with original bike box, all paperwork, original unused icetoolz toolkit, extra mech hanger, e13 cassette tool. I will act on buyers behalf for any warranty issues during the warranty period (happy to sign agreement to that end) Selling my Capra due to other bike related interests (road / indoor trainer / xc) and the wife wanting a new conservatory. I bought the bike in April but I only used it for 4 days riding in the alps. I am VERY particular / OCD with my bikes so upon delivery; i stripped the bike down fully and inspected / re-greased bearings and re-torqued everything. I then fully invisiframed the bike in beautiful matt finish kit, including the fork. After applying the full invisiframe kit, i then went over the bike with an oxford helicopter tape kit and applied small patches to any unprotected areas (painstakingly!). e.g. around BB, dropouts etc. Crank boots were also used so crank ends are unmarked. I probably spent in excess of 18 hours in the process of preparing the bike as i wanted it. When re-assembling the bike; i swapped out some components which i already had on another bike which i preferred over the capra's standard build which meant that a few parts on the bike are new and unused now i have built the bike back up to standard build.. The spec of the bike is as per TY industries website; however a number of components are new and unused. The reason for these parts being new is that i am very particular with brands that i like, and i did plan on keeping the bike for several years and swapping some bits over to things that i prefer and was going to sell these bits, however the swapped parts have now been returned to my hardtail and the wifes bike.. Therefore, the parts which are new and unused are as follows: WHEELSET - E*THIRTEEN TRS 27" (NEW) FRONT TIRE E*THIRTEEN TRSR 27,5" (NEW) REAR TIRE E*THIRTEEN TRS+ 27,5" (NEW) SEATPOST E*THIRTEEN TRS+ (NEW) CASSETTE - E*THIRTEEN TRS+ (NEW UPPER CASSETTE BLOCK FITTED (E13 WARRANTY DUE TO LOCKRING ISSUE) New brake pads fitted (don't forget to bed in first) Payment via bank transfer only, funds to be cleared prior to bike leaving. Don't expect reply if your account has no history. happy to take buyer out for ride on local trails after payment. Located in Port Talbot, Wales. Local pickup only. Can delivery locally upon clearance of payment if required.

New Rockshox pike 160mm 27.5 / 650b 42mm offset 15x100mm axle RCT3 solo air uncut steerer tapered brand new warranty replacement. only taken out of box to take photo. £450 collection or will ship at buyers cost.. @£15

yt capra size medium Bought from yt in March 2015 The reverb dropper post is a brand new warranty replacement which hasn't been used (the unit itself is brand new, the trigger and hose are original) All standard apart from hope enduro wheelset. Condition: The frame has been invisiframed from new and also extra bits of helicopter tape here and there. I have also had the chainstay wrapped in an innner tube which i have just taken off to show chain stay is fresh underneath. The tape has taken a few scratches here and there and there are a few marks and stone chips here and there but nothing major. The bike hasn't been used through the winters so is in above average condition. Hope tech enduro rims - a few dents in the rear rim but not too bad. Maxxis 2.3 HR2 folding tyres - worn about 50% but still usable. Crankset has some scratches on it from rock strikes. The drive train is original so although is working fine will need to be changed at some point. .I will also include a pair of race face atlas pedals which are used but i have recently serviced them . They were £110 new. bleed kit for the stealth dropper seat post and spare mech hanger provided. cash on collection only please.

(selling on behalf of the wife) YT Capra Pro frame size small. Brand new 2016 frame in 2014 colours. 2014 BOS Kirk shock fully serviced August 2015 and little use since. The frame is a warranty replacement and is brand new. Looking at the new frame, the faults it was warrantied for have all been addressed on this new frame, these include: - ISCG mount revised to ISCG 05 advanced bracket - Seat stay and mech hanger revised - head tube and headset revised The frame has a 3 year warranty and I'd be happy to help with correspondence with YT as the original owner if required. To be fair to YT, they have been great with the warranty, and the old bike was ridden for ages with the small faults it had with no issues. Only selling as the wife has ordered a new bike (new capra!) The shock is in excellent condition and was fully serviced last year. Frame comes with brand new high end headset and bottom bracket bearings. Please note: the plastic bottom bracket rock guard and the rear maxle are not new as they were not replaced, however they are are in good working order. YT suggest size small is suitable for heights between 5'3" and 5'9". (160cm -- 174cm) I'm 5'7" and it fits me perfectly. Looking for £1500 I would prefer cash on collection, but could post of required. South Wales. Photos here https://www.dropbox.com/sh/kw6zrnsuvvvj2q1/AAAJ2hnlP8esn5SNXszXu_vFa?dl=0