gisc1999

Bike was Purchased around 1 year ago. Has only been used for around 5 months during summer last year and has been in storage ever since. Bike has had new a Bottom Bracket, headset and gear cable. Frame bearings are in mint condition. Bike has not been pressure washed. Comes with SWAT tool in head tube and has down tube bags. Fork has also had EVO upgrade from plush suspension along with a service. The shock has also had Generation 3 seals installed along with a service in the past month once again by plush suspension. Awesome bike to ride reluctant to sell but don't have the space for it anymore. FRAME FACT 11m, X-Wing layout, full carbon chassis and rear end, All Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, alloy link & adjustable shock extension, 12x148mm dropouts, replaceable derailleur hanger, 160mm of travel SEAT BINDER Alloy, 38.6mm REAR SHOCK Custom Öhlins STX, Single-Tube design, Rx All Mountain Tune, AUTOSAG, adjustable compression & rebound damping, 216x57mm FORK Öhlins RXF 36, 29/6Fattie, Single-Tube design, air spring w/ adjustable 3rd chamber, adjustable low-speed compression, adjustable rebound, 15x110mm thru-axle, 51mm offset, 160mm of travel RIMS Roval Traverse Carbon 29, hookless carbon, 30mm inner width, 24/28h, tubeless ready, hand-built REAR HUB DT Swiss 350, Star Ratchet, 36t engagement, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h FRONT HUB Specialized, sealed cartridge bearings, 15x110mm spacing, 24h SPOKES DT Swiss Revolution FRONT TIRE Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3" REAR TIRE Butcher, GRID casing, Gripton compound, 2Bliss Ready, 29 x 2.3" INNER TUBES Standard, Presta valve REAR DERAILLEUR SRAM X01 Eagle, 12-speed SHIFT LEVERS SRAM X01 Eagle, trigger, 12-speed CASSETTE SRAM X01 Eagle, 12-speed, 10-50t CHAIN SRAM X01 Eagle, 12-speed w/ PowerLock CRANKSET Truvativ Descendant, carbon, Boost™ 148, 170mm crankarm, 24mm spindle CHAINRINGS Steel, 30T BOTTOM BRACKET SRAM GXP, XR 73 STEM Specialized Trail, 3D forged alloy, 4-bolt, 6-degree rise GRIPS Ergon GD1 HANDLEBARS Specialized DH, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, cut to 760mm, 31.8mm clamp SADDLE Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm SEATPOST Command Post IRcc WU, 12-position micro-height adjustable, alien head design, bottom mount cable routing, remote adjust SRL lever, 34.9mm, 150mm of travel FRONT BRAKE SRAM Code R, 4-piston caliper, hydraulic disc, metallic pads, 200mm rotor REAR BRAKE SRAM Code R, 4-piston caliper, hydraulic disc, metallic pads, 180mm rotor

Frame has been used and has the usual cosmetic damage which I have tried to show in the photos. Shock: Ohlins STX 22 No BB or headset bearings included. £30 postage charge