glick31

Renthal Fatbar Lite Carbon Zero Rise (31.8) 780mm Sweep 9 degree. Not ridden but a stem has been mounted to bar. One small scratch, bottom right side, see photo. Price includes UPS ground shipping and PayPal fees.

SRAM Roam 60, 27.5 Wheel Set, version B1, XD 11/12 Speed Driver Body, Boost Spacing both Front and Rear. $560.00 OBO. Free FedEx ground shipping anywhere in the lower 48, when asking price is met. PayPal excepted. Wheels were bought new in November 2017 and have less then 200 miles on them. The reason why I am selling these wheels is because I want a rear hub that is compatible with the new M9100 XTR freehub body. Wheels are true and the bearings spin smooth. 30mm Internal Rim Width. 1690 grams, both wheels with rim tape and valves. Front axel 15mm x 110mm. Rear axel 12mm x 148mm. Front hub comes with both RockShox torque end caps as well as end caps that are compatible with Fox. Both wheels have six bolt brake rotor interface. XD freehub driver. Also comes with a Shimano freehub driver. Comes with a tube of SRAM freehub grease. Spare spokes. Spare SRAM rim tape and valves. Spare cartridge hub bearings for both the front and rear hubs. Complete rim sticker kit for three pairs of wheels so you can match the color of your bike to these great wheels. Please mail with questions.

Bellow are the parts and their a la cart prices. If someone ends up buying every thing at once then your total would be $2,885.00: $2,290.00 - Used for four rides (I got it on 11-14-2017), 2018 medium Pivot Mach 6 frame, version 3 (dark silver) with 2017 FOX factory kashima float DPX2 Shock, with the EVOL air sleeve, 216x63mm: http://www.pivotcycles.com/bike/mach-6-carbon/#1 . $680.00 - 2018 Pike, B1, RCT3, DebonAir, Charger2, Crown Lockout, 160mm, 27.5", Solo Air, boost (15mmx110mm) RockShox fork. I got on 11-7-2017 and it has four rides on it too. It was on my 2018 Mach 6 and the part number is 00.4019.656.008. Steer-tube is cut to 210mm, weight 1770 grams, off-set is 46mm, Maximum Tire Width 81 mm / 2.8, and axle to crown is 552mm. $40.00 - e*thirteen BB92 Bottom Bracket, for a 30mm axel. $75.00 - Headset 110-Series ZS56 (Bottom) Black and 110-Series ZS44 Tall Cover (Top) Black. Only has four rides on it. Thanks, Matt

New Cane Creek Double Barrel InLine 200 x 57 mm 7.875 x 2.25 This is a new, in the box, rear shock. It has not been installed. It is not a "take off". Please see the photos of each of the eyelets. The shock was purchased on 8/23/2016 from Cane Creek, by me. I received it on 8/29/2016. I will include a copy of the invoice with the shock, for "your" proof of purchase. Mounting hardware is not included. The shock was to be a "spare" or "back-up" for my Pivot mach 5.7. I unexpectedly sold the bike, so I have no use for this shock. From Cane Creek: Cane Creek’s Double Barrel rear shocks have been a hit since day one, inspiring confidence with next-level adjust ability and control. Originating as a piggybacked coil shock, later iterations included a piggybacked air-sprung model and then a piggybacked air-sprung model with a Climb Switch. Cane Creek has upped the ante once again by bringing the same damping characteristics of the DB shocks to the inline shock category, making it compatible with more frames than a traditional piggybacked rear shock. Twin-Tube Technology: Circulates oil continuously through the valving to achieve highly controllable, independent damping for both compression and rebound strokes. 4-Way Independent Adjustment: Low and high speed compression and low and high speed rebound. Built by Hand in Fletcher, NC: Every Double Barrel shock is hand-built in the Cane Creek factory and dyno checked to ensure the highest level of performance and quality control. Highly adjustable and offers a wide range of fitment options. What you get: Cane Creek Double Barrer Inline Rear Shock, 200 x 57 mm Cane Creek Owners Manual Cane Creek Alan "Adjustment Wrench" Platform volume reduction spacers (AAD1204) Please see ebay add, # 112156830432