guinnessale

I had big plans for this hub but they never materialized… This is a very well designed and versatile bike component that can turn any bike with a 135*10mm rear axle into a single speed without the need for a tensioner (say goodbye to bent or broken derailleur hangers), and/or alternatively tweak a single speed bike’s geometry. The latter purpose is why I bought it in the first place, as you can place the rear axle 20mm up, down, backward, forward or anywhere on the 360 degree circumference meaning if you do run a tensioner (which I also have for sale) you can fine-tune how a bike feels, ie, make it slacker and lower, steeper and higher, longer or shorter in the chain stays, or anywhere in between. Flanges are drilled for 32 j-bend spoke holes, and it is threaded for the standard ISO 1.370x24TPI threaded freewheel (I have a couple used ones for sale too). It also has the six bolt ISO disc brake feature. It is not quick release compatible, but there is no option for bolt on 135mm hubs in the category menu. These are about $400 CAD to get shipped to Canada, and I will accept $280 for local pickup (located just up the hill from downtown Calgary), or add $20 to ship within Canada if needed.

I have a few single speed parts for sale here, some are used and in great condition, most are brand new. All of the fixed cogs and freewheels are 1.37”-24 threaded and the lock rings are 1.29”-24 reverse thread, so standard size. I have: 20 tooth freewheel, used, minimal wear on the teeth- $20.00 16 tooth freewheel, used, tiny bit of wear on the teeth-$15.00 16 tooth fixed cog, used, no sign of wear- $10.00 16 tooth fixed cog, new-$15.00 15 tooth fixed cog, new-$10.00 13 tooth fixed cog, new-$10.00 All City lock ring, used-$10.00 1 used, 2 new lock ring, each-$5.00 16 tooth cog, new, splined for HG driver body-$5.00 *SOLD* Located near Renfrew/ Mount View

I’m selling my orange Chromag Lynx DT because I switched to one that fits my sit bones better. I ran this on my fixed gear bike so the top is in perfect shape not having had tumbled down faces every weekend. The paint is worn/chipped off of the rails in the usual spots, but other than that the saddle looks brand new. Also, I much prefer the graphics on this one when compared to the new design from Chromag. At 291g it’s pretty light for having chromoly rails. Width is 135mm, length is 280mm. Asking $50.00, located near Renfrew/Mount View

I’m selling this Chromag 88 semi-direct-mount stem designed for the contemporary Marzocchi 888 dual crown forks. I’m guessing at the year, but I bought it new circa 2008. The length is 40mm The anodizing is worn in spots but it’s still solid. I’m asking $60.00 but I’m open to offers. I am willing to ship via Canada Post.

Unused Evo 28.6mm diameter aluminium seat post for sale. I bought it for a vintage frame that had a seat tube squished down to fit a 27.2mm post. I thought this would fix that issue but it turned out that it need something in between. I tapered the first centimetre or two with sandpaper before I knew that it wouldn’t fit, so that’s why it’s worn down on the bottom. It has never had a saddle installed though. It is about 280mm from minimum insertion to the saddle rails and 395mm from the bottom of the post to the saddle rails. $20.00, OBO, located near Mount View/ Renfrew