happychappy79

Santa Cruz V10.8 XXL rear end 29” Please call or text as I don’t check email frequently Neil 07786961757

Santa Cruz V10.8 27.5 rear end. New This will make you XXL 29” V10 into a mullet. It will slacken it slightly and drop the BB about 4mm. Otherwise this rear end is for a Small to Large V10.8 frame Give me a call or text if interested. I don’t check emails frequently Neil 07786961757

Sick Gnarcissist hardtail 29”. Custom colour From memory I think the reach was 480mm, 64degree head angle. Chainstay maybe 450?. The geometry was the same as a transition dh bike at time of manufacture. This frame has been in the loft for quite a long time. The reverb is still in there. I tried to get it out but it had seized in frame. I would recommend using a stem to clamp it with some handlebars to remove. The reverb had recently been serviced when I put it in loft. The bottom bracket never lined up very good from new. I had no issues once the BB was installed. The frame was great when it was built up. The steel is more forgiving than aluminium and had a pretty slack head angle. It was ideal for aston hill where it was used. If you are unhappy with frame. Please return for a full refund within 2 weeks of the sale Drop me a text or phone (I don’t check emails very often) Neil 07786961757

V10.8 CC XL 2025 Brand new Hope wheel set pro5, 30mm rims Brand new Hope head set Brand new Tag grips Brand new frame bearings Almost new Hope Tech4 EVO brakes Ohlins DH38, 46mm crowns Fox Factory DHX2 #550 (used a few times) ENVE carbon Minnaar bar2 ENVE carbon seat post SRAM XO shifter, mech SRAM DH Cassette on SD Driver Raceface Atlas 165mm cranks Blackspire 34T chain ring E13 chain guide KMC gold chain SDG saddle Schwalbe cut dirty dans DMR Brendog peddles Please call or text if interested. I do not check emails very often. Thank you Neil 07786961757

Santa Cruz V10 XL frame New bearings Invisiframe #550 spring One owner from new Drop me a message on my phone as I don’t always check pinkbike inbox. Thank you