henry3w

Rockshox Revelation 29er / 27.5 + fork 130mm Just had full upper and lower service with new rock shox oil and sram butter. Stanchions and bushings are perfect. Very low hours on fork. -very long steerer from xl frame 220mm -110mm boost spacing -29er or 27.5 plus -540ATC -51mm offset -130mm travel -tapered steerer -star nut installed -motion control damper -extra volume spacers -stock rock shox thru axle

KS Internal Dropper 31.6 x 125mm. Includes: -Two Remotes (2x new never used) and 1x Southpaw lever with handlebar mount as shown. -New housing and stainless cable inc allen head cable stop. Max insertion is about 250mm. Total length from seat rails to end of post is 430mm. Works great. Very low use. Only flaw is that there is some paint rubbed off as shown in pics. This is covered when installed. Stanchion is perfect. No knicks. Reason for selling: got longer one as I am very tall! Will ship to North America for $25 CDN extra.

Great shape, only one season of use! -Regular Spring -Approx 240mm UNCUT Tapered 1-1/8 to 1-1/2 Steerer. -MUST Use 180mm rotor or larger. -150mm Axle Spacing for fat bike -494mm ATC -Clears 4.8 x 26 tires Comes with everything you need to install! -Lauf drop in Headtube compression fitting and top cap -Lauf 15mm Through Axle -Lauf Bag. -Lower Bearing (Does NOT require crown race) -Brake Bolts (Does NOT require adapter if using 180mm rotor) With bubble wrap extensively for shipping! (at buyers cost)

Up for sale is a lightly used XL RSD Mayor aluminum fat bike frame, bottom bracket, headset, stem and rear axle. Used 1.5 winter seasons. Original owner and will provide original receipt from Hype Velo in QC city to new owner. Loved it but it was too small for me, so I had a custom frame built and transferred the parts. I am 6’7 (200cm)..would be good for someone under 6’3””. See link below. https://www.rsdbikes.com/portfolio/v3-mayor-aluminum/ Frame-$350 ($680 value new with HST) Rear Axle -$25 Headset-$25 Bottom Bracket and Axle- $60 -Frame - RSD Mayor in Raw. 197mm rear spacing, 30.9 seatpost inner diameter. Will clear 5 inch x 26 tire. Suspension corrected for bluto / lauf. Adapter for 180mm rotor and seatpost QR inlcuded. -Rear Axle - Maxle Thru Axle QR -Headset - Cane Creek 40 inset, includes new never installed lower race. -Bottom Bracket and Axle - Race Face with 30mm x189.9 mm axle included. Works with turbine and next crankset.