ianhegedus

I am a certified bicycle mechanic who has wrenched on bikes my whole life. I love riding bikes. I do it for the pure joy of riding fast.

Block user

Recent

Selling
Jan 14, 2019 at 15:10
Jan 14, 2019

Fox DHX2

$600 USD
So I have a 2018 Fox DHX2 that is basically brand new. I bought this shock rite before I sold the bike it was on. This shock has maybe 20 hours of riding on it. I have a 600 lb fox SLS spring. The shock is a 7.875 x 2.25 with 8x22 mounting hardware. Let me know if you have any questions.

Selling
Dec 29, 2018 at 9:20
Dec 29, 2018

Fox float X2

$500 USD
I have a 2017 fox factory float x2 that I need to unload. This shock has been fully serviced less than 10 rides ago. It works flawlessly. The shock is 7.875 x 2.25. I had it on my hightower LT and will also fit a 2015- 2018 Bronson. I also have extra air volume spacers that I will include with the sale.

Added 11 photos to Buysell
Nov 13, 2018 at 15:32
Nov 13, 2018
Selling
Nov 13, 2018 at 15:29
Nov 13, 2018

Giant TCX Advanced Pro With E-TAP!!!

$4000 USD
I'm starting to test the waters and see if there is any interest in my badass cyclocross bike. This bike is sweet and built with some pretty awesome components. The build goes like this: 2018 Giant TCX advanced pro frame and fork. Size Medium SRAM E-TAP Shifters and WIFLY rear derailleur SRAM 11-42 11 speed cassette SRAM S350-1 172.5mm Cranks with a 40T narrow wide chainring SRAM PC-1170 chain SRAM Centerline 160mm rotors Pacenti Forza wheels Hutchison Overide 38c tubeless tires TRP Spyre SLC brakes with compressionless brake housing Whiskey No.9 Carbon bars 46cm Whiskey No.7 90mm stem Brooks microfiber bar tape Brand new Giant contact newtral saddle So this bike is only about 6 months old, if that. I bought it for my commute bike and it has been an absolute blast. I recently was blessed enough to get the E-TAP about a week ago form a friend. I installed it on the bike with a wolftooth roadlink and it all works like a charm. The bike is set up quite roadie rite now but I have the stock wheelset for the bike along with the 40c Maxxis Rambler tires the bike came with. Both wheelsets are set up tubeless. I also feel that I should mention that I am a service manager at a local bike shop. All of my bikes are extremely well taken care of. Yes, they are used and have a blemish here and there but every bike I have sold is in excellent condition and very sound. I wouldn't sell a bike that I myself wouldn't ride. So this bike, and all of my bikes have been meticulously cared for. I also have the E-TAP front derailleur that I will include with the sale encase you don't like the 1x setup. I also have the charger, 2 brand new batteries, and I replaced the shifter hoods when I installed the kit so they are about a week old. I also have 2 other handlebars and stems if you want a different width/length or just a lower price for the bike.This bike does have some small knicks and scuffs from being a bike but nothing out of the ordinary. I'm also not in a huge rush to sell this bike but I wanted to put it up to see if there is any interest. So please do not waste my time or yours with insulting offers. Let me know if you have any more questions!!!

Added 10 photos to Buysell
Nov 13, 2018 at 15:00
Nov 13, 2018
Added 1 photo to Buysell
Nov 13, 2018 at 14:40
Nov 13, 2018
0 comments – Add comment
Selling
Nov 13, 2018 at 14:39
Nov 13, 2018

Santa Cruz Hightower LT

$5500 USD
So unfortunately it's time for me to sell my beloved Santa Cruz Hightower LT. This bike is in EXCELLENT CONDITION and has some nice upgrades along with many unused parts. The build goes like this: Santa Cruz Hightower LT CC frame. Size medium Fox 36 performance elite fork. -the fork travel has been increased to 160mm and I swapped out the fit4 damper for an RC2 damper Fox float X2 factory shock. -i installed a needle bearing shock bushing on the back of the shock to increase the sensitivity of the rear end. (It makes a big difference) Raceface ARC 35 rims hand built to DT Swiss 350 hubs. (These wheels maybe have 10 rides on them) Maxxis minion DHF 3C 2.5 front tire Maxxis minion DHR ll 2.4 rear tire Truvativ descendant carbon cranks 170mm with crank arm boots Brand new gxp bottom bracket Brand new praxis works 32T chainring Brand new rockshox reverb 150mm dropper post with a brand new 1x remote Brand new WTB Silverado thinline saddle Brand new SRAM guide RSC brakes with brand new avid G2 rotors (203 front, 185 rear) Brand new Santa Cruz carbon bars. (Uncut) Brand new raceface affect 50mm stem Brand new Santa Cruz Palmdale grips SRAM XO1 eagle drivetrain. (Shifter, derailleur, cassette, and chain) I'm sure I'm forgetting some stuff but you get the jist. This bike is in immaculate condition. There are a few knicks and scuffs but nothing even worth mentioning. The fork and both shocks have been serviced for the sale. the brakes and seatpost have been bled. I did a full tear down and rebuild of the bike for this sale as well. I also will include the stock fox dpx2 shock that also has a needle bearing shock bushing installed. And an extra derailleur hanger with the sale. I also feel that I should mention that I am a service manager at a local bike shop. All of my bikes are extremly well taken care of. Yes, they are used and have a blemish here and there but every bike I have sold is in excellent condition and very sound. I wouldn't sell a bike that I myself wouldn't ride. The only reason I am selling this bike is that I have moved to a different shop that is not a Santa Cruz dealer. I am pretty firm on price and I feel I have it listed at a fair price. But that said, I am willing to negotiate on a REASONABLE price. Please don't waste my time or yours. Let me know if you have any more questions!

ianhegedus CalvinHuth's article
Apr 4, 2018 at 20:39
Apr 4, 2018
Selling
Jan 17, 2018 at 20:39
Jan 17, 2018

2 Easton ARC24 rims

$150 USD
I have up for sale 2 Easton ARC24 rims that are brand new. They were laced up but not ridden. When I bought the bike they were on i relaced the wheels with wider easton rims. They are 28 hole, 29" rims. They do have a small scuff or two but only from sitting in my shed for a while. Let me know if you have any more questions. I will entertain any reasonable offers. Thanks!

Selling
Jan 17, 2018 at 20:32
Jan 17, 2018

WTB frequency i19 team with dt 350 hub

$125 USD
I have up for sale a WTB frequency i19 team rim laced to a DT Swiss 350 hub. The wheel is as straight and true as the day it was laced up. The hub is a 15x100 through axle with a 180mm avid rotor mounted as well. Tubeless ready with tape and a new valve. Let me know if you have any more questions. I will entertain any reasonable offers. Thanks!

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv56 0.047625
Mobile Version of Website