jackrogers21

This beautiful 2014 56cm Specialized S-Works Tarmac SL4 comes in at 14.5lbs/ 6.58kg with Dura Ace pedals and 2 bottle cages (weight pictured is without pedals). Although the bike is nearing 10 years old and has many miles on it, road bike geometry hasn’t changed much in that time and the geo specs are almost identical to the new Tarmac SL8. The bike is built up with the timeless SRAM Red 10s groupset, S-Works cranks, and carbon bar, seatpost, and saddle. The bike will come with a Gray 5.0 SLX carbon tubular wheelset as well as a DT Swiss r460 rim/ 350 hub alloy tubeless-ready clincher wheelset. The carbon wheels were used as a race set by the previous owner so the brake tracks are pristine. Steerer tube has plenty of room to dial in fit. The bike shows plenty signs of use: chainstay tire rub from a wobbly wheel, scratches on the brake lever from laying it down, etc. The worst offender is a spot under the top tube near the head tube. The previous owner who I knew well said it was caused by leaning it up against a fence when it proceeded to slide/ tip over and gouge the top tube. A quick tap test shows no change in sound in that area, and the many miles ridden since the incident indicates the bike is primed for more miles. Full specs below. Located in San Jose, CA; will travel around the greater Bay Area to meet or can ship at buyer’s expense. If you have any questions feel free to reach out. Frame: 2014 Specialized S-Works Tarmac SL4 56cm Seatpost: Color-matched S-Works 27.2, 20mm offset Handlebars: S-Works deep drop 42cm Stem: S-Works 100mm Saddle: S-Works Power 143mm Shifters: SRAM Red 10s Derailleurs: SRAM Red (short cage RD) Chain: SRAM PC-1090 Cassette: SRAM Red XG-1090 11-26t on carbon wheelset, XG-1070 11-28 on alloy set Cranks: S-Works 172.5 53/39 Brakes: SRAM Red Bottle cages: S-Works Rib cage carbon Wheelset (1): Gray 5.0 SLX Carbon tubular with Specialized Turbo Allround Tubular 24c tires Wheelset (2): Dt Swiss r460 rims laced to 350 hubs. Continental GP5000 clincher (tube type) tires 25c

For sale is a Fox/ Marzocchi Grip Damper. This came off a Marzocchi Bomber Z1 coil that was swapped to a Grip2 damper. This damper should work in any Fox 36 or a Marzocchi Z1 coil or air. It had about 700 miles of use before it was removed.

For sale is a 2022 Fox 36 Performance Elite with 160mm travel and a 44mm offset. Comes with the bolt on Fox fender. Fresh oil and dust wipers/ foam rings. Steerer measures 7 1/4"/ 85cm. Stanchions are totally clean (lint is what you see in pictures). Lowers have one scuff shown in pictures. $500+ shipping

For sale is a 2022 Stumpjumper Evo Frame in a size S4 (Large) with a Fox Float X Performance Elite shock. I'm the original owner and rode the bike for 550 miles before moving the parts to an alloy frame. Some small scratches on the frame are pictured, but overall the frame is in amazing condition. Shock could use an air can service, but holds air fine and all adjustments work. Will come with the original headset, 0 deg and +/- 1deg headset cups, and a bottle cage. Dropper and derailleur housing will be left in the frame for easier install of a new one. I also have wheels available. Rear Travel: 150mm Seatpost Diameter: 34.9mm Wheel size: 29/29 (a separate shock link is available to make it mullet) $1500+ shipping Frame & Shock $2000 + shipping Frame, shock, mullet link, and 3 piece Carbon wheelset

For sale is a front 29” and rear 29” AND 27.5” set of Roval Traverse Carbon wheels. Perfect for those looking to upgrade to a carbon wheel set and whose bikes can run both mullet and 29” F&R. Both rear hubs are DT Swiss 350s and the front hub is a stock Specialized hub with brand new bearings. The 29” set I bought with a used bike and it had many of the scars you see when I inherited it. (There are a lot of rock marks/ scratches on the 29” rims). I rode them for over 1000mi over 2 bikes since I got them and they’ve been faultless besides a single broken spoke on a bike packing trip a couple years ago. The 27.5 rear was only built up a year ago from a used hub and a warranty rim (hence the no decals). I rode the 27.5 rear once on mellow terrain before going back to the 29. The 29” rear has been freshly rebuilt with new spokes and nipples, since some drive side spokes had marks on them from chain drop by the previous owner. Both rear hubs have been cleaned and greased and the front hub has new bearings. All 3 wheels have fresh tubeless tape and new valves $575+ shipping for all 3

Fox SLS coil 650lb, 61mm/2.4” stroke Ridden maybe 100 hours but was too high a rate for me so never bottomed it. $70 plus shipping. Also have a 2022 DHX2 Factory VVC 210x55 for sale

2022 Fox Factory DHX2 with VVC rebound circuit. 210mm eye to eye 55mm stroke length. Ridden for maybe 100 hours, all on a trail bike with and the spring was higher than I needed so shock maybe never touched the bottom out bumper. All adjustments still work great, climb switch is nice and firm. $400, buyer pays shipping.