jc3920

Size medium 2020 Scott Scale 940. Full carbon frame with an SX drivetrain and Shimano brakes. Fresh oil change in the fork with no rides since, drivetrain has just been fully degreased and cleaned. Brand new Sram NX chain installed with no rides since. Fresh sealant in the front tire. Some marks are visible on the frame but nothing that would compromise its integrity. A couple of paint chips on the top of the down tube have been coated in nail polish to help protect the carbon. Any question please feel free to ask.

For sale is my Scott Gambler 710 for $2,000. I am the second owner, and the bike has been used lightly for around 2 years mostly as a loaner bike for friends and family. All cosmetic damage was from the previous owner who didn't take care of the bike as well as he should have. Most notable defect is the paint chipped (no cracks in frame) on the top tube and some scratches on the right fork stanchion. The stanchion scratches have no burrs that could damage the seals, from the 2 years I have owned it there has been no evidence of leaky seals. Aside from that this bike still absolutely rips, suspension feels buttery smooth and the brakes are powerful. Last week the bike was fully disassembled down to the bearings and rebuilt with the appropriate amount of grease and torque specs. Below are notable serviced performed on the bike. Fork air spring service + new oil in lowers 4 bearings replaced in the rear triangle, all other bearings felt smooth Full drivetrain degreased in ultrasonic cleaner New shifter cable + housing Rotors and pads cleaned All pivot bolts cleaned and greased to eliminate any creaking Any questions don't hesitate to ask.

Near mint condition 2020 Fox 49 Factory, $1,300 shipped. Fresh air spring service + lower service with no rides since. Hardly a mark on the entire fork, stanchions are perfect with no scratches. Somehow lost the brake guide along the way, new ones are around 12$ Steerer is 6-1/8 inches Code is: DZH6 for full specs

2019 Intense Sniper Trail Pro for sale, asking 3900$ firm. Wiling to ship within the continental U.S. The bike has been fully serviced this past week, it is ready to ride with no extra maintenance. Below are a list of service done this past week. Full frame disassembly, all pivot bearings checked for performance issues, bad bearings replaced Fork air spring and seal service, new oil added Rear shock air can service Full drivetrain disassembly, everything cleaned and degreased Brake pads and rotors cleaned All pivots/bolts cleaned and greased to eliminate any creaking Most parts coated with Maxima SC1 polish There is some cosmetic damage to the bike as expected but nothing that would compromise the integrity of the frame. Total milage is unknown, I would be happy to provide more pictures of the drivetrain if necessary. Some cable rub on the bottom bracket has been touched up and covered with Gorilla tape so no further rubbing occurs. There are also a couple of nicks on the dropper post but no burrs that could damage the bushing, performance has no issues. Please note, I recently broke off the Fox 32 rebound knob which unfortunately is a common issue with the StepCast models, damper works with no issues and you can still adjust the rebound, just the knob is not attached. New assembly is 30$ which I would recommend with the next damper service, however not necessary in order to ride. Specs below Fork: Fox Factory Float 34 Shock: FOX Factory DPS Brakes: Shimano Deore XT Cranks: SRAM Stylo Carbon Eagle Shifter: SRAM XX1 Derailleur: SRAM X01 Cassette: SRAM X01 Wheels: DT Swiss M1700 Spline