If I go down it's nearly always because a tree pushed me.
Also a welder.
Jul 19, 2019 at 11:35Jul 19, 2019
This is just a spare back up fork that I've had laying around for a number of years, I believe it is a 2013 model. Unsure of how long it has been since the last service that it had. There is some minor wear on one of the stanchions, I could not get the worn spot to show up in a picture but it is from wearing on the bushing, and it is still in the minor damage stages. 170mm air sprung, no issues other than the slight wear spot on one stanchion, 26" wheel size, 1.5" tapered steerer tube and it is 7.25" long, 20mm axle. 50 bucks, low price due to slight damage.
Added 1 photo to Mobile
Jul 19, 2019 at 10:39Jul 19, 2019
Posted in "inverted forks!"
Dec 17, 2017 at 19:38Dec 17, 2017
jonbikes jonbikes's photo
Dec 14, 2017 at 7:34Dec 14, 2017
Added 6 photos to Bikes-and-Parts
Dec 13, 2017 at 9:43Dec 13, 2017
Added 4 photos to Buy-sell
Dec 13, 2017 at 7:36Dec 13, 2017
Dec 13, 2017 at 7:28Dec 13, 2017
Up for sale is my 01 b3000 (same truck as a ford ranger). 3L v6, 2wd, 5 spd manual, 250 000km on the truck. It has a good limited slip rear end that was installed around 170 000km. The truck was in a minor fender bender which is why there are now some black body panels on it, the damage was only cosmetic however and the registration is still "active" and not "rebuilt" or anything like that. This truck is an awesome little shuttle truck, which is a good portion of what I used it for. Recent maintenance (within the last 15 000km) includes a new clutch, new upper control arms/ball joints, and new outer tie rod ends. The truck had an alignment and nothing else was found to need replacing at that time. The tires still have about 75% tread remaining. Currently registered and insured in Alberta. Only selling because I bought a newer 4wd version of the same truck.
Added 6 photos to Buy-sell
Sep 23, 2017 at 16:45Sep 23, 2017
Sep 23, 2017 at 16:38Sep 23, 2017
2015 Session 88 frame, XL, with two days on it. I purchased this frame new last winter and built it up, it saw only 2 days of riding this season due to the fires, smoke and lack of rain in the kootenay area where I was for the summer. 2012 boxxer wc Fox dhx rc4 Avid Code brakes, reach and contact adj. holzefeller cranks New chris king headset New hope pro 4 rear hub laced to 829 New BB Two ride old Minion DHF & DHR super tacky tires MRP chain guide x7 shifter/der. Fork minor service was last done in the spring with only 2 rides since, and rear shock was fully serviced at the same time. The only thing that needs attention is the front hub, the bearings are rough, the wheel is an azonic outlaw.
Posted in "Cable Rattle Solutions Wanted"
Apr 12, 2017 at 19:40Apr 12, 2017
Photo by jonbikes