jwarden9

Hope stem. Perfect condition. Red. 70mm length. Buyer covers postage

GAP crankset. 83mm axle. Requires standard external, threaded bottom bracket. In good used condition. Suitable for DH bike build 170mm length. Buyer covers postage costs Came off a 2014 kona entourage and haven't used since

Fox super light steel (sls) springs. Orange. In good used condition. 400 X 3.00 Can post at buyers expense

Hope pro 2 front hub. Black. 20mm axle adapters fitted. 32 spoke holes Bearings feel in good condition Can post at buyers expense

These wheels have been sitting in my garage for a couple of months now (I no longer have a 29er) and they deserve to be used. Both wheels run perfectly true and have no significant damage what so ever. There are a couple of scuffs to the paint work (as seen in photos) and some of the decals that I installed are beginning to come off due me being lazy and not fitting them correctly. New decals can be bought from slik graphics for £20 should you want a different colour to match your bike (http://www.slikgraphics.com/collections/e-thirteen/products/e-thirteen-trsr-carbon-rim-decal-kit) They set up tubeless very easily The rear has 148mm boost spacing and the front uses a non boost hub (100mm) with a boost spacer on it. This means the front wheel is currently set up as a boost and the wheel has been dished to compensate for this. This also means that it can be re dished and the spacer replaced so that it fits non boost forks. The hope pro 4 hubs are immaculate and spin perfectly well. No issues at all. 1 small issue...when attempting to remove the sram 11 speed (gx) cassette I damaged the teeth used to tighten/release the cassette from the free hub body. This means that a new free hub is required. It currently works perfectly well as the cassette is near brand new. But if you require a different cassette, then a new free hub body is required. This is very easy to fit and can be found in most decent bike shops (http://www.chainreactioncycles.com/hope-pro-4-freehub-assembly/rp-prod149329) The price of the cassette that is included with the wheel is around £85 (http://www.chainreactioncycles.com/sram-xg-1150-11sp-cassette/rp-prod135801?gs=1&utm_source=google&utm_term=&utm_campaign=Chain+Reaction-UK-PLA-PLA-All-TB-SE-Shopping+QLB+Product+Tablet&utm_medium=base&utm_content=mkwid|s5RPbOSDq_dt|pcrid|161825380226|pkw||pmt||prd|492725UK) I have been as honest and open as possible. These wheels are in very good condition and would be a great upgrade. Please feel free to ask any questions. Open to offers. Cheers https://www.pinkbike.com/news/ethirteen-trs-race-carbon-wheels-review-2016.html

Fantastic bike, in very good condition. Protected with all mountain style protection. Would suit riders 5'11" plus. Lots of upgrades. RRP was £4200, so it's half price... Frame - FACT 9m, X-Wing layout, carbon front chassis, M5 alloy rear end, All-Mountain Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, ManFu link, oversized pivot bearings, 12x148mm dropouts, replaceable derailleur hanger Rear Shock - RockShox Monarch Plus, Rx All-Mountain Tune, AUTOSAG, rebound and 3-position compression adjust, 216x57mm Fork - RockShox Lyric RC 27.5, Solo Air, compression and rebound adjust, tapered steerer, 15x110mm Maxle Stealth thru-axle, 46mm offset, 170mm travel Rear Derailleur - SRAM GX, long cage, 11-speed Shifter - SRAM GX, 11-speed, trigger Chain set - Shimano Saint M820, 175 mm length (New), Hope 32t chainring Bottom Bracket - Race Face, threaded Cassette - SRAM XG-1150, 11-speed, 10-42t Chain - SRAM PC-1110, 11-speed w/PowerLink Brakes - SRAM Guide RE, hydraulic disc, sintered pads, 200/180mm rotor Handlebars - Spank Spike vibracore 800mm wide, 31.8mm Stem - Spank Spike 50mm stem Grips - DMR death grip Rims - Roval Traverse 650, hookless alloy, 29mm inner width, 24/28h, tubeless ready Front Hub - Roval Traverse, sealed cartridge bearings, 15mm thru-axle, 110mm spacing, 24h Rear Hub - Roval Traverse, DT Swiss internals, sealed cartridge bearings, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h Front Tyre - Schwalbe Magic Mary 2.35 front and rear set up tubeless Saddle - Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm Seatpost - Rockshox reverb 170mm drop Spares - 2 x Butcher, GRID casing, 650x2.3", 60TPI, Aramid folding bead, 2Bliss Ready Rear Tyre (Brand new) Swat box is an awesome feature. So good not having to ride with kit every ride. Will come with the 2 neoprene type pouches that were provided when I bought the bike. Can provide brand new ethirteen bash/chainguide too (not fitted) Can swap forks for 2017 fox 36 if that suits too... Spare mech hanger Please contact me if you would like to try the bike out or would like additional photos of anything in particular