laingmtb

2022 forbidden dreadnaught GX - mullet This bike has been ridden 4 times since its original purchase since I spent a long time working with Brink bike shop to build the bike up to what it is now, hence the price is a lot, but the bike is as close to brand new as you would find on PINKBIKE. the wheel size is listed at 29" since mullet isn't an option here. The reason I am selling my bike Is due to moving on from the sport and the bike would be better with someone who can ride it more often than I will. the part list is as follows: -size LARGE forbidden dreadnaught frame with Ziggy link (mullet link) -FOX 38 factory 170mm -FOX DPX2 factory float shock (154mm travel) full SRAM GX eagle groupset burgtech composite pedals e13 stem burgtec bars 800mm SRAM code RSC 4-piston bikeyoke dropper post MAXXIS ASSEGAI 29"X2.5" front MAXXIS MINION DHR II 27.5"X2.4" rear e13 30mm rims DT swiss hubs any questions shoot me a message Ollie.

Specialized roval hub, sealed cartridge bearings, 12x148mm thru-axle, 28h

FOX FLOAT DPS Performance 210x52.5mm the shock was ridden a handful of time before swapping out to a preferred shock, the bike it was from has recently been sold so there is no point keeping the shock has a spare part for the bike. the shock was only swapped out due to preference of a coil shock. performance in the name, speed is the game -MESSAGE FOR FURTHER QUESTION-

these came of a 2018 specialised stumpjumper and were quickly replaced to a RockShox pike which I had spare from my old bike. due to this the forks haven't seen much abuse and have spent the majority of there lifetime in a box. -150MM- -15 x 110 TA boost - -27.5-

this was my first bike that was replaced after a year into riding. it was very lightly ridden on mainly XC and green trails but the bike is more than capable of more aggressive riding due to strong components and modern geometry. this bike is NOT ridable rather a rolling chasse which needs a build kit and components to complete. perfect for a project bike. -2017 specialised frame - SR suntor fork - specialised bars -Shimano 160mm rotors - sunrise 9-speed cassette -whistler stickers on bike for extra steeze

this bike was bought new in 2016 and was ridden lightly on small wooden jumps and small dirt jumps. the bikes been regulary maintained aswell as replacing the rear tire due to a puncture. the rims have no dents in them as the bike is in good condition. the bike is sold with 2 pegs but 4 can be included with little expense. -MORE PHOTOS CAN BE ADDED IF NEEDED- 11.96kg fork - Salt "AM 20", 1020 Hi-Ten, 4130 Crmo Steerer, 28mm Offset Handlebar- 1020 Hi-Ten - Rise: 8.6“, Width: 28.75”, Back Sweep: 11°, Up Sweep: 2° Stem- Salt "Pro v2" Top Loading, 50mm Reach Grips- odi softies Headset- Salt "Pro" Int. Headset, Sealed Bearing Cranks- Salt "AM" Seamless Tubular 3-Piece, Crmo, 170mm, 8 Spline Sprocket- Salt "AM" Steel 26 Tooth Bottom Bracket.- Salt "Mid" 19mm, Press Fit, Sealed Bearing Pedals- SaltPlus "Stealth" Loose Ball, Nylon/Fiberglass Chain- Salt "AM", 510h Type Seat WeThePeople- "Arcade" Mid Padded Tripod Seatpost- Alloy Tripod Seatpost Clamp- Salt "AM" Alloy Brakes- Salt "Moto" Alloy U-Brake Rear Brake Lever- Salt "Moto" Alloy gyro- No / Holes for Removable Gyro Tabs pegs- cult pegs