layloemay

Selling a Fit Bike Co. BF stem in black (51mm). I never used this stem. I installed it on my bike once without riding around with it and took it off after a half hour because I didn't like the way it looked. I thought I would like the stem a lot, so I bought a silver one which I'm also selling on here. I had the stem custom counterbored so the fork compression bolt would sit flush with the stem. There are absolutely no scratches on the stem. The stem in the pictures just has some dust on it. It's in perfect condition. Specs (from Fit Bike Co's website): - Made in America - 6061-T6 Aluminum - Grade 8 Allen head hardware Rise: 28.66 (upgright), 2.84mm (inverted) Reach: 51mm Weight: 11.4 oz Only willing to ship for free within the U.S. I will ship it tightly wrapped through USPS Priority Mail.

Selling a Fit Bike Co. BF stem in silver (51mm). I never used this stem. I installed it on my bike for less than five minutes and took it off because I didn't like the way it looked. I thought I would, and even bought a black one which I'm also selling on here. There are absolutely no scratches. You can tell from the picture it's basically brand new. I had the stem custom counterbored so the fork compression bolt would sit flush with the stem. In picture #3, it might look like the bolt isn't sitting entirely flush with the stem, but that's because of the bolt's length, pushing itself up from the floor a bit. Any compression bolt will sit entirely flush with the stem when installed correctly. Specs (from Fit Bike Co's website): - Made in America - 6061-T6 Aluminum - Grade 8 Allen head hardware Rise: 28.66 (upgright), 2.84mm (inverted) Reach: 51mm Weight: 11.4 oz Only willing to ship for free within the U.S. I will ship it tightly wrapped through USPS Priority Mail.

S&M 28T TUFFMAN SPROCKET ($40 SHIPPED) Selling brand new S&M Bikes 28T Tuffman sprocket in black. Comes with 19mm and 22mm adapters. I am only selling within the 48 contiguous states at the moment. PayPal preferred. I carefully package all the items I sell myself so I know the parts I sell will arrive in the same condition you see in the pictures. Details: • Made in the USA • 3D CNC'ed from 1/4" 7075 T-6 Aluminum • 28T Size • Laser etched on the back • 1/8" teeth, 15/16" center bore • 19mm and 22mm adapters included

TREE LITE SPLINE DRIVE SPROCKET ($55 SHIPPED) Selling a brand new Tree Lite Spline-Drive 28T Sprocket in black for a 19mm 48-splined spindle. This is the older version that was made in the USA. I am only selling within the 48 contiguous states at the moment. PayPal preferred. I carefully package all the items I sell myself so I know the parts I sell will arrive in the same condition you see in the pictures. Details: • Made in the USA • 5/16" Thick 7075-T6 Aluminum • Heat Treated Drive Splined Insert for 3/4" Spindle Cranks • 1/8" Wide Teeth • Weight: 3.0oz

FIT BIKE CO SKY HIGH BARS ($54.95 SHIPPED) AND FIT BIKE CO INMAN BARS ($49.99 SHIPPED) I'm selling two brand new, never used, Fit Bike Co handlebars and I'm selling them separately (pinkbike won't allow me a separate page for each bar): 1. Fit Sky High Handlebars 2. Fit Inman Bars Both bars include new Fit Tech grips and new Odyssey Par Ends. The Sky High Bars have been cut down to 27.5" wide. The Fit Inman Bars have been cut to 28.0" wide. I am only selling within the 48 contiguous states at the moment. PayPal preferred. I carefully package all the items I sell myself so I know the parts I sell will arrive in the same condition you see in the pictures. Details (Fit Sky High Bars): Rise: 8.25" Width: Cut down to 27.5" Back Sweep: 11 degrees Up Sweep: 1.5 degrees Details (Fit Inman Bars): Rise: 8.375" Width: Cut down to 28.0" Back Sweep: 11 degrees Up Sweep: 1.5 degrees

ECLAT SEAN BURNS TOPLOAD STEM ($40 SHIPPED) Selling a black Eclat Sean Burns topload stem in excellent condition. There are no scratches or dents on the stem. Ken at Zodiac Engineering performed a stem counterbore for a clean flush look that works with any fork bolt. I am only selling within the 48 contiguous states at the moment. PayPal preferred. I carefully package all the items I sell myself so I know the parts I sell will arrive in the same condition you see in the pictures. Details: Material: 7075-T6 Alloy, Full CNC Machined Reach: 50mm Weight: 273g (9.62oz or 0.60lbs)

CUSTOM S&M ATF ($220 SHIPPED) I am selling a custom S&M frame that is practically brand new for $299 shipped. I package all the items I sell myself so I know they'll arrive the same way they look in the pictures. I wrap all parts in plastic food wrap, then in bubble wrap, and then place it in a box surrounded by enough brown wrapping paper so that the part(s) don't move during shipping. Every part sold will be shipped by USPS parcel economy with a delivery confirmation number. The frame's top tube length is 20.5" and it has the exact same geometry as the S&M BTM frame but with the following exceptions: 1. Tubing from the ATF frame 2. 9-inch standover height 3. Welded 990 seatstay brake mounts and a welded cable stop 4. Custom Serial Number: TIPSY The frame was originally raw but I had it professionally powder coated black as well as the S&M head tube badge. I built it one day but never rode it. The next day I took it apart and it's been sitting in my office ever since. I paid around $700 for this custom frame. I will include the following with this purchase: 1. Custom S&M Frame (see details below) 2. Fit Bike Co 22mm bottom bracket kit (2 sealed bearings, internal spacer, and two black cone external spacers 3. S&M Head Tube Badge (powder coated black) To sum up the frame details: Top Tube: 20.5" Bottom Bracket Height: 11.5" Bottom Bracket Style: Mid Rear End Length (slammed): 13.125 Head Tube Angle: 75 degrees Seat Tube Angle: 71 degrees Standover Height: 9 inches Brakes: Welded 990 Mounts & Welded Cable Stop Dropouts: 14mm Gyro Tabs: None Color: Black Seat Clamp: Integrated I am only selling within the 48 contiguous states at the moment. PayPal preferred. I carefully package all the items I sell myself so I know the parts I sell will arrive in the same condition you see in the pictures.

S&M PITCHFORK XLT ($99 SHIPPED) I am selling a chrome S&M Pitchfork XLT in mint condition. The fork is in perfect condition because I never really used it. A chrome fork on my bike looked better in my head than in reality. There are no dents or scratches. Even the dropouts look untouched (see photos). The steerer tube is shortened by approximately 7.5mm so no spacers are necessary. Includes a customized silver Tree compression bolt (H10) to help compensate for the shorter steerer tube. The Tree bolt is threaded higher than the stock Tree bolt thanks to the magic of Ken at Zodiac Engineering. Disclaimer: the steerer tube was a little thick when I first bought it and attaching a stem on was nearly impossible. I took it down to S&M and they thinned it out a bit. It is now much easier to slide a stem on to the steerer tube, but I still use the coin trick to spread the stem a tiny bit to make it effortless. Fork Details: • Legs: Double Butted, Tapered, 4130 CrMo • Dropouts: Laser Cut 3/8" Slot • Steerer Tube: 1 Piece CNC-Machined 4130 CrMo, Extruded 6061 Steerer Tube Insert • Steerer Tube Length: Cut down to 152.5mm • Compression: M10 X 1.25 Thread (Custom Silver Tree Compression Bolt) • Offset: 33mm • Heat Treatment: 4Q Baked Post-Weld I am only selling within the 48 contiguous states at the moment. PayPal preferred. I carefully package all the items I sell myself so I know the parts I sell will arrive in the same condition you see in the pictures.