leonbmx

For sale is my Santa Cruz Bronson V2 CC. I bought the frame brand new in 2020 and built it up and rode it on and off for the last 3 years. I upgraded the rear shock to a Push 11/6 and sent the fork to Avalanche to get their Open Bath Damper Cartridge. The combination is amazing on any terrain. Currently set up for riders with gear in the 180lbs range but I have spare coil springs for both to tailor them to your weight. I came across a deal on a new complete bike that I could not pass up, so I decided to sell this one. I ended up taking 90% of the parts of the new bike and put those on this bike. So you are getting a used but not abused frame, fork and dropper and the rest is BRAND NEW. Here is the break down: Frame – Santa Cruz Bronson CC V2 150mm Size M (full carbon) Shock – Push 11/6 (Serviced in 2023) (https://www.pushindustries.com/products/elevensix) Fork – 2020 MRP Ribbon Coil 160mm with Avalanche Open Bath Damper (http://www.avalanchedownhillracing.com/MRP/MRP%20Ribbon%20Open%20Bath%20Cartridge%20Kit.htm) Headset – Wolftooth Premium Seatpost – OneUp V2 180mm with Wolftooth ReMote Light Action Lever ------------------------------ BRAND NEW PARTS ----------------------------------------------------------- Stem – E13 Plus 50mm Bars – RaceFace NEXT R 35 800 x 20mm Rise Grips – Lizard Skins Charger Evo Grip Black Brakes – Shimano XT BR-M8120 4 pot with RT86 6-Bolt 203/180 rotors Drivetrain – Shimano XT 12 Speed Pedals – Crankbrothers Stamp 1 Wheels – 27.5 Revel RW Carbon with Industry 9 1/1 hubs Tires – Maxxis Minion DHF 2.5″ EXO+ Front, Maxxis Minion DHR 2.4″ EXO+ Rear

Up for sale is a Shimano Deore XT RD-M8100 SGS base with NEW XTR RD-M9100 cage and pulleys. The XT derailleur was used for about 3 months and then I found a great deal on an XTR derailleur and I ended up replacing the cage on that with a Kogel Kolossus, so I put the brand new XTR cage on the XT body. So you get the same SGS cage length, but with the bigger XTR pulleys, so a smoother ride.

Up for sale is a Shimano Deore XT FC-M8100 175mm crankset with NEW XTR SM-CRM95 32t chainwheel and new MT800 Bottom Bracket. There are some small nicks on the drive side crank, the non-driveside crank is essentially new as I replaced it with a Stages Power Meter after only one ride.

For sale is an installed, but never ridden XTR SM-CRM95 32t chainwheel. (cranks NOT included) Price is shipped via USPS Priority mail

For sale is a great condition Stages Power Meter Non-Driveside Crank based on a Shimano Deore XT FC-M8100/8120 175mm crank. It was used for 3 months and I ended up upgrading to a complete LH/ RH Stages set.

Up for sale is a complete 1x 12 speed setup with components from both XT as well as the top of the line XTR groupset. You only need a Microspline compatible wheelset and a new chain and you are up and running. Everything is 3 months old and in great condition, unless otherwise mentioned Included: Rear Derailleur - Shimano XT RD-M8100 SGS base with NEW XTR RD-M9100 cage and pulleys ($120) Cassette - Shimano XT - CS-M8100 10-51 tooth ($100) Crankset - Shimano XT FC-M8100 175mm with NEW XTR SM-CRM95 32t sprocket ($200) Bottom Bracket - NEW Shimano XT - BB-MT800 ($15) Shifter - Shimano XTR - SL-M9100 I-Spec EV with NEW outer cable. ($ 85)

For sale is a excellent condition set of mountain bike wheels. Crankbrothers Synthesis Enduro Alu 27.5 with Industry 9 1/1 hubs. These are for Shimano Microspline 12 speed cassettes. Front hub is 15x110 Boost Rear hub is 12x148 The wheels come with Santa Cruz Reserve Fillmore Valve Stems installed. These are awesome wheels, but I got a great deal on some carbon wheels, so these can go.

For sale is a “new” condition set of MOC Introvert bars. Material: 4130 heat treated Chromoly, multi-butted Rise: 9" Backsweep: 2° Upsweep: 2° Width: 27.5" Weight: 26.6oz/755g I only installed grips and then I decided my project needed chrome bars. Blemishes as shown in the pics - some minor scratches on the right grip area and a small nick on the crossbar.

For sale is a mint condition set of BSD Substance 2PC cranks in Raw, they are 165mm length and have a 22mm spindle. LHD/RHD compatible. These were installed, but I decided my project really needed chrome cranks. Never ridden, no blemishes whatsoever.