maxwellfrank

I am selling a 2013 Fox 34 160mm Talas 26” CTD Kashima coated fork. I rode the fork lightly for about a year on a trail bike and just got a Pike. I warrantied the fork because some of the kashima coating was coming off. They replaced the uppers, installed new seals, new rebound knob and rebuilt the fork. The fork is pretty much brand new. I was a little bummed that they cut the steer tube to match it to the old uppers. The steer tube is 8” long and was on a Santa Cruz Nomad. I left a lot of room on the fork because I knew I was going to sell it. There are small scratches from normal use but nothing major. This is a great deal for a fork that is basically new. I have the warranty paperwork that states what was done to the fork at Fox, if you want to see it email me.

I am selling an XO group set with XX cranks. Everything in this kit has been run for a little over a year. All the components works great and I took excellent care of the parts. I took everything apart cleaned and lubricated it before I took the photos so the next owner can put them straight onto their bike! These are used parts so there are a few scratches. The things that I must disclose are that the cranks are pretty scraped up from riding in rocky terrain. The next thing is that the chain guide has a small broken piece that is hard to describe but is shown in a picture. I have been using the chain guide this way for about half the time I have owned it and it seems to work fine this way. What’s included: 175mm XX 2x cranks Q166 with 26 and 39 chain rings (Replaced the 26T chain ring three months ago and a brand new 39T chain ring is included with the cranks. Msrp $100) MRP 2x Chain guide with brand new back plate and bash guard. The only used part on this guide is the pulleys and cover. Also comes with extra pulleys but they are used. 10 speed XO rear derailleur medium cage (has some scratches but still works great) 2 speed front XT derailleur XO shifters, 2 speed front and 10 speed rear SRAM PG1070 cassette 11-36T, 10 speed (not 100% sure how to tell how much life is left but I have been running it for about five months.) Two chains. Slightly used chain is a SRAM PC1071 hollow pin and the brand new chain is a PC1090 hollow pin. Also comes with brand new 10 speed master link SRAM GPX bottom bracket is used. One side feels good and one side feels just ok. Feels fine when installed on the bike. I DO NOT WANT TO SPLIT UP THE GROUP! WILL ONLY SELL AS A COMPLETE SET!