mearsyb

Hello, I'm reluctant to make the add but I would benefit from a slightly smaller frame so I'm looking to swap my Felt for a smaller bike. I have looked after this bike and a new bottom bracket and headset were installed this week and two weeks ago brand new shimano Deore brakes and shimano discs were installed. Felt virtue 3 2013 size L carbon Rockshox sector tk solo 130/150 Rockshox Monarch shock Wtb front rim and tyre with Sram hub Shimano rear hub 10spd SRAM cassette dt swiss xc tubeless rim high roller tubeless tyre running tubeless Brand new charge spoon Saddle SRAM s1000 crank set SRAM small sprocket FSA 36tooth sprocket Brand new not rode yet sram gxp bottom bracket Shimano deore front and rear brake, shimano 203 front and 180 rear rotors, brakes are two weeks old SRAM front and rear shifters x9 SRAM carbon x9 rear mech SRAM x7 front mech Converted the bike into x2 front rather than x3 Well looked after and just the odd scratch from use. Runs like a dream and I don't want to part but it's slightly to big so something smaller would be better for me. Looking for a swap mainly for another xc all mountain bike. I'm located between Goole and Scunthorpe.

I would like to swap my DH Mongoose Boot'r for an XC bike. She's never been down hill or rode hard. I only use it for commuting so it's never been jumped. It's running like a dream. Mongoose Boot'r size Large Saint front 203 brake Deore rear 203 brake Saint 9 speed rear mech Shimano zee rear hub and shimano cassette Hope Santa Cruz front hub Drop off forks Hope direct mount stem Strait line chain guide and bash ring. Located between Scunthorpe and Goole

I have for sale my my fully custom bike. All parts are no older than 6 months old an have only seen a months worth of riding! I am looking for about £650 for the custom bike and about 150 for the rd frame with the wedge post. The Spec is: Frame: Stereo Dan Paley Loaded 20.6 tt Forks: WTP Helium 2011 Stem: S&M race xlt 57mm reach Bars: Amity RD cut to 29 wide Grips: Cult Front Wheel: Eclat rim on WTP supreme hub with fly peg and WTP supreme hub Guard only 1 week old Back Wheel: Brand new profile LHD on a primo series rim and is 9tooth, odyssey jpeg ti and a profile Hubguard 2011 model Cranks: Twombolts only 1 month old Sprocket: Metal bike co 30 Tooth Pedals: Jim C sealed metal Chain: KMC Seat: United Trinity Headset: WTP Bottom Bracket: BSD Also i have the Amity RD frame only used for a month and the animal wedge post to go with it. I have a 28 tooth Proper Sprocket , its all silver with black round the teeth. I will not split any parts from the full bike. If you are seriously interested then you can text me on this number 07801580474 I have 100% feedback on ebay so can be trusted. Try to text me not message me on hear as i dont have time to check the site often enough.