mikey05pro

200x50 M/M tune. Includes volume spacers & shock pump. Mounting hardware in photo not included, they were needed for the sale of my frame. Less than 30 hours ride time. No maintenance required so far. All I've done is added volume spacers & wiped it down before each ride.

SRAM X0 Eagle - Package deal. GXP, Boost spacing, 175mm arms, 32T boost chainring. Chain, cassette & chainring still have some life left. DM any additional questions. Thanks

DEITY Mohawk Carbon, Copperhead & Knuckleduster Grips. Bars are un-cut 787mm, 31.8. Low miles. There are a few small marks from the brakes & stem. 50mm Copperhead stem. Comes with the Knuckleduster grips shown. Package deal. Shipping included. Thanks

Very low miles on these pedals. Comes with unopened bag of cleats & shims, extra pins & tool to service the pedals. DM for any additional info. Thanks

Rockshox Pike RC3 150mm Boost No major damage to note aside from some scratches on the Maxle lever. Steer tube length is approximately 6 7/8” long. PM any questions

2018 Santacruz Hightower CC size XL. $1400 for frame (DVO shock, seat clamp, headset, rear axle & dropout). $1300 with the Fox Float Factory. Santacruz recommended an XL for someone 6’1” - 6’3” & I fit right in there at 6’1 1/2”. I am the original owner of this frame. It is set up with un-cut DEITY Mohawk bars (787mm). DEITY Knuckleduster grips & a 50mm DEITY Copperhead stem (31.8 clamp). Canecreek 40 headset. NO wheels included. Brand new extra rear dropout included. SDG Circuit Ti rails seat. I replaced pivot and linkage bearings in December of 2018. DVO Topaz (200x50) installed in May of 2018. I tried to include any and all damage in the photos. I do have some protective tape installed on the downtube, toptube and various parts of the frame to prevent damage from cable rub. I always get complements from my friends on how clean it still looks after I wash it up. This can be set up as a PLUS wheeled bike too. Price break-down: Frame (DVO shock, seat clamp, headset, rear axle & dropout) - $1400 Frame (FOX shock, seat clamp, headset, rear axle & dropout) - $1300 *the following items would be in addition to the price of the fram& shock Fork - SOLD Drivetrain - SOLD Seatpost (+ service kit) - SOLD Brakes - SOLD Bars, Stem & Grips - +$150 PM me with any additional questions you may have. For detailed info on geometry & specs, check the link below. https://www.santacruzbicycles.com/en-US/hightower-my18

2017 E13 TRS+ 29 wheelset, XD cassette body, boost hubs (15x110/12x148). Small dent in the rear wheel pictured. Some small scratches from rocks kicking up on the sides of the rims. These wheels are pretty tough, I’ve only had to true the rear wheel 1 time since purchasing them (June of 2017) & I just did that in January of 2018. Bearings still feel great. Original rim tape installed and will include the original valves & tools/wrenches that came with the wheels. Only selling as a set. PayPal or local pickup in Pasadena CA area. Additional specs on the website https://bythehive.com/collections/trs-plus-wheels

Selling a complete 2016/17 Evil Insurgent build. Size LARGE Slimeball Green. The main triangle was recently sent in for a warranty issue and I just got that built up around May 15th. It has a NEW front triangle & headset with around 8 rides on it since then. New cables & housing were put in during re-build so they may need some adjustment after stretch. It is currently set up tubeless. There are 2 scratches on the right stanction that can be seen in the close-ups of the fork. I have left them alone because they haven't caused any issues with the seals. I will include the extra volume spacers for the fork. I will also include the 15mm axle for the fork, it is currently set up with the 20mm axle. The brake pads were replaced not too long ago and have some decent life left. I prefer a local pick-up if possible but I am willing to ship in the U.S. Shipping is included in the price. PayPal accepted Parts list: Front triangle & headset are new (May 8, 2017) 2017 Fox 36 RC3 Factory Kashima 2017 Fox Float X Factory Kashima KS LEV Integra 150mm with Southpaw lever SDG Circuit seat Ti rails Deity DC31 Mohawk Carbon bars (un-cut) Deity Cavity stem 50mm Sensus grips DT EX471 rims Fr & R NO PEDALS INCLUDED SRAM X0 hubs Fr & R (all additional adapters will be included for 15mm FRONT as well as anything that came with the rear hub) Maxxis Minion DHF Fr & R SRAM X1 drivetrain with X-SYNC Direct mount 32t chainring, 175 crank arms, XG-1180 cassette 10-42 E-thirteen LG-1 bash with roller Shimano XT brakes Fr & R, 203 Ice Tech rotors Fr & R https://www.evil-bikes.com/products/insurgent