mysquarehwel

Marzocchi Monster T A heavy fork but near on bulletproof. Steerer is 200mm long These have done about 15 hours of riding since last service, happy to strip and replace oil for new buyer, if you let me know your prefered oil weight or riding style. 20mm Bolt through axle, the axle needs to be treated gently, it still works but the 8mm Allen key hole is the worst part about these forks. I am an honest person, i dont want someone buying these without knowing about this. You can still attach the axle, you can still tighten it to the low torque setting and the clamp the for the axle on the opposite leg is what holds the axle in place. No striped threads or rounded bolt heads. There is a nasty scratch on one of the lower legs, this has been there the entire time I've owned them, it's not affected the forks, no oil is left on either leg even after heavy use. Happy to deliver for price of fuel, deposit required.

26" Commencial Wheelset They have covered about 15 hours of riding in 6 years 20mm Bolt through front hub 12x150 (if i remember correctly) Rear hub. Comes with rim tape but no tyres or tubes. Happy to deliver for price of fuel, deposit required.

2007 Giant Faith 3 frame This was built up to ride some DH, my friend crashed badly and this bike was shelfed about 5 years ago, i bought it back off him to break. Frame is in fair used condition, none of the bushes are ruined, none of the bolts are rounded. Fox rear shock was serviced by and has seen roughly 15 hours of use over the last 6 years. No signs of leaks. Shock, Headset, seatpost, custom cranks & chain device included. Cranks are BMX arms with a MTB specific chainring and a custom made spacer as the Faith has a 73mm botm bracket. Will swap, message to offer your items. Happy to deliver for price of fuel, deposit required. Thanks

FireEye ShortFuse 360 Custom Built 24" Jump Bike I had all good intentions of riding this, but my other bike doesnt get ridden enough as it is so the time has come to part company with this. I have fitted a lot of new parts, some are old parts from my old jump bike the spec is as follows... Frame - 2012 FireEye ShortFuse NEW Forks - 2002 Marzocchi DirtJumper 100mm Headset - 1080 Sealed Bearing - NEW Front wheel - Diatech/Halo 24" Rear wheel - Diatech/Halo 24" Rear tyre - Maxxis Max Daddy Front tyre - Maxxis Max Daddy Bars - Club Roost Riser Stem - Funn Henchman Grips - Lock On, Red Seatpost - 27.2 Alluminium Seat Post Clamp - Ragley 29.8mm NEW Seat - DMR Rear brake - Avid Cable NEW Brake lever - Promax NEW Cranks - 3 Piece Bottom Bracket -Gusset 19mm NEW Chainring - 36T BMX NEW Chain - KMC SingleSpeed NEW Cassette - Single Speed Pedals - DMR V8 Chain Pulls - DMR 14mm Both hubs have had new bearings and axles, the rear wheel has a flat spot. Forks have had fresh oil and havent done a minutes riding since, This has cost me well over £700 in parts to build, offers are accepted on the asking price. Collection from OX26 within 7 days of auction ending. I can deliver for the price of fuel @ £10 per 60 miles, please contact me to check availablity before buying.

Not riden any longer, has had new inner tube and brake pads, it cant collect dust any longer! will swap for the right parts, what have you got? Collection from OX26