obowdidge

Superb enduro bike which I used as a park bike so it really hasn’t been ridden that much. I work for a shop that is an evil dealer so it has never wanted for anything and has been looked after by our World Cup level mechanic. It is mostly standard but a few changes are XTR four pot brakes, one up dropper ( can be fully inserted into fame) carbon rail fabric saddle, and a one up steerer tube tool. Please feel free to ask any questions via message.

I am selling this bike as I have built myself a new jump bike and am no longer using this one. I have used it mostly at the pump track and once at the dirt jumps at Fleet (nothing too big) but I have probably ridden it only 15 - 20 times. It has a couple of chips on the frame which, annoyingly, were done when in transit (pic attached) but is otherwise in great condition as the photos should show. It has new deity grips and a seat clamp, Crank Brothers one composite pedals, and a Shimano XT four-pot lever and caliper with Swiss Stop pads.

I did a frame swap from my propain to this new SB130 T series half way through last year. I work in a Yeti dealer (Velocipede Cycles in Tunbridge Wells) and we like to try different bikes so I have had this for a year but I now have a new Orbea Rise with similar travel so this would just sit on the wall looking great and I would rather someone enjoy it. Specs below: Frame - Yeti SB130 T Series frame 2021 Turquoise (137 travel) Invisiframed from new Shock - Fox DPX2 Factory Kashima Fork - Fox Float 36 Factory Kashima 29" 170mm Grip2 Brakes - NEW SRAM G2 RS front and rear Crank - Truative Descendant Carbon eagle Cassette: SRAM X01 Derailleur - SRAM AXS GX Wireless Dropper - Fox Transfer Kashima 150mm Dropper Lever - NEW Bike Yoke Rims - Stans ZTR FLOW MK 3 110/148 XD 29" Hubs - Propain OEM Bars - NEW Raceface Carbon Grips - NEW Raceface Saddle - SIXPACK Kamikaze Dummy Pedals (if wanted) - Kona Wah Wah alloy There are a few edges where the invisiframe has got dirt underneath but it is just dirt and the frame is undamaged. It comes with all of the manuals plus the official yeti grease and gun for the switch infinity, and a granite multitool fitted in the headset. Original yeti top cap and star nut included.

UPDATE: Sorry for not replying to the messages I have received, a very close family member passed away (non-covid related) and I have completely ignored this for a few months but am now back and will answer any emails going forward. For sale is my Propain Tyee which I got as a full bike at the end of last summer. I love the bike but I had the chance to get a new Yeti frame so I have done a frame swap and am now selling the Propain. It has been used but is in excellent condition as it has probably only ridden a couple of hundred miles. There is one small chip in the paint, shown in a picture above, the stick on logos on the downtube has been scratched by some bushes (the frame is fine), some wear that I have only seen after taking cables off, and but the rest of the frame is excellent. It comes with a Fox Factory DHX2 with a 550lb Fox SLS and a 450lb Fox SLS spring, a sixpack headset, and a used SRAM BB (both came with the bike). These have a 5-month waiting list at the moment, so this is a virtually new bike available straight away. I am not desperate to sell the frame so no silly offers, please.