rayviljoen

Selling my nearly new Dartmoor Hornet 4X build. Only selling as I'm emigrating. The bike has been ridden less than 10 times and is in excellent condition. NOTE: Some of the photos still show the old chainring, grips and brake rotors. The current build comprises of: - 2014 Dartmoor Hornet Frame (Black) Tapered headtube. 12mm Thru Axle. - Dartmoor Blink Tapered Integrated Headset in Gold. - Polished Truvativ Stylo Cranks (175mm) with brand new GXP Bottom Bracket. - Shimano Saint Pedals - On-One Stainless Steel 32T Chainring - KMC Single Speed Chain - Reverse 13T Single Speed Kit - Superstar DHX Wheelset with As new ProRider Bearings - Schwalbe Gatestar tyre combo. Nobby Nic Gatestar Front & Racing Ralph Gatestar Rear. - Manitou Marvel 120mm Forks w 15mm ThruAxle. - Spank Spoon Stem 35mm - Polished Gusset Slade Bars. Cut to about 640mm - Hope SL Grips - Hope Tech X2 Brakes with new Sintered Superstar front pads - Azure Aztec Black & Gold Floating Rotors 180mm Front & 160mm Back. (Only just added, so see newest photos) - Truvativ Hussefelt Seatpost. (Cut Down) - On-One ROCKER Saddle - Funn Frodon Seat Clamp ATM the bike is running as single speed, but can very easily be converted to run gears as the rear hub only uses a single speed convertion kit. Most of the parts was purchased brand new about 2 months ago ( including the forks ) and the polishing job on the bars and cranks pretty much looks like chrome. I'm not accepting ANY offers lower than £600 and I will ship, but will not cover any shipping costs. I'll include a sealed bottle of fork oil, Stendec Fork Grease, Bleed Kit and whatever else I have to go with the bike. ( As I'm leaving the UK altogether ) The bike is super stiff with the short stays and the 12mm axle and the forks are great. Original build had Fox 32's on and these are just in another class. Hope I covered it all, but pls just message me with any questions. Cheers Ray

2012 Marzocchi 66 CR Tapered. RRP £679.99 Tapered Steerer 180mm Travel 38mm Black Stancions I bought these from Jenson USA and, but they are a bit too big for what I need. They come in original packaging and includes manual, 20mm axle, stickers etc. Please note the steerer was cut by Jenson USA to 178mm and theres 2 small clamp marks on the steerer tube as a result. (See photos) The 66 CR is a heavy duty freeride fork.. The bushing design features vertical slot for oil fluid and lubrication and fitted design process forms it to the internal casting machine seat. 180mm Compression Rebound(CR) Spring/ Air Preload QR20 Axle 38mm hard anodized aluminum tapered stanchions Tapered aluminum steer tube 8" PM D- brake (MAX 230mm) I will post them with a 1-2 day courier or collection from Aldershot. PayPal OK