Block user

Recent

Selling
Feb 21, 2021 at 16:54
Feb 21, 2021

Manitou Mara Inline shock, 210x55

$500 CAD
Manitou Mara Inline shock 2021 model, 210x55. Hayes part number 192-37260-A006. Manufacture date 2020/11/13. I purchased this along with a Mara Pro in case the Pro's piggyback reservoir fouled my frame. But the Pro fits, so selling the Mara inline. Never installed, opened or used. This 210x55 Mara is basically unobtanium at the moment. This is easily the best inline shock on the market today. Details are here. https://hayesbicycle.com/collections/shocks/products/mara_z?variant=34530359083053 Thread on MTBR about this shock: https://www.mtbr.com/threads/new-manitou-mara-shock-available-like-a-cross-between-the-mara-pro-and-the-mcleod.1142139/ Asking price includes economy shipping anywhere in Canada.

Oct 31, 2020 at 13:02
Oct 31, 2020
quotes MacDonald Place black diamond trail
303 m - 00:01
Oct 31, 2020 at 11:11
Oct 31, 2020
quotes Cat Track black diamond
168 m - 00:01
Sep 27, 2020 at 13:42
Sep 27, 2020
quotes Granny knits a tea cozy ride with wife
21.3 km - 01:15 - 1 achievements
rete 9point8's article
Aug 7, 2020 at 12:12
Aug 7, 2020
9point8 Announces the Slack-R Headset Angle Adapter
@myotherrideisyourmom: of course it's the same, I don't dispute that. But lengthening your fork 10mm does not raise your BB by the same 10mm (your statement). The rear doesn't raise 10mm as well, it stays the same. BB lift is around a third of the front wheel lift, and if the fork rake is extended as well as in this case, 2mm BB lift for the 10mm fork lift, and 1.8 degree slacker.
rete 9point8's article
Aug 7, 2020 at 8:18
Aug 7, 2020
9point8 Announces the Slack-R Headset Angle Adapter
@myotherrideisyourmom: yeah, no. Basic geometry says it's not so. If the BB was right under the head tube then yes, but it's around 2/3 of the way toward the back of the bike, which doesn't move. Place a broom flat on the ground and lift the one end 10cm. Then measure how high the middle is off the ground (it will be 5) and 1/3 from the end still on the ground (3.33 off the ground). Same thing here. You can see from the diagram above that the BB raises 2mm despite the 10mm fork extension - in this case because the wheelbase extension also somewhat drops the whole bike when you rake out the fork angle.
rete 9point8's article
Aug 6, 2020 at 20:39
Aug 6, 2020
9point8 Announces the Slack-R Headset Angle Adapter
Umm, no. Adding a cm to your headset cup will raise your bottom bracket around 1/3 of that or 3mm.
Jul 17, 2020 at 13:33
Jul 17, 2020
quotes Lunch Ride
20.9 km - 02:12 - 1 achievements
Jun 18, 2020 at 16:31
Jun 18, 2020
quotes Afternoon Ride
23.0 km - 01:15
rete thodges's photo
Jun 18, 2020 at 9:54
Jun 18, 2020
This damper will not fit any 2020 RS fork. The thread pitch is 1mm, which is too course for modern 35mm RS forks since 2016 when they switched to 0.5mm thread pitch. This damper is the 2014-2016 Pike RCT3 charger damper that came with 26, 27.5 and 29 forks (there are 3 different lengths of this damper) in 140mm to 160mm travel.

Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv56 0.013456
Mobile Version of Website