salter1144

Hi looking to buy a saracen Myst dh frame. let me know what you have

Hi looking to buy a set of Fox 40's or 2010 and newer boxxers. Must be good condition, no badly marked stanchions. looking to spend around £300

2009 Marzocchi 888 RCV Came new on my bike in 2010. Mechanically these forks are in very good condition, everything works and there are no leaks. I've always cleaned the seals after each ride. They are buttery smooth like marzocchi's always are. They have rebound and compression adjustments on the bottom of the legs as well as air adjustments at the top. Currently set up for 10-11 stone rider. Although can be easily set up for any weight rider by adjusting the air pressures (warning do not put a lot of air into them, they only need 15 psi in one leg and up to 50 psi in the other, although Im unsure of which way round it is. But you can get the manual for these forks on the marzocchi website) A few scratches to the lowers (see Pictures) but no marks to the stanchions. I have just made some new protective covers for the lowers made out of monster cans and put them on now. These work great, especially for uplifts and personally think they look great too. - 203mm (8in) of buttery smooth travel - 200mm x 1.1/8th steerer tube - 20mm bolt thru with axle - 8in Post mount Disc brake All in all a great set of forks for downhill/ freeride Although they are working great, as they are around 2 years old they could probably benefit from a service. (although in my opinion they work the same as when I got them) Only selling as fancy getting some fox 40's or 2010 (or newer) Boxxers - these are the only things I would trade them with.

looking for some stanchions for fox 36's as mine have stanchion wear, let me know what you have. also am interested in fox 36 rebound cartridge. Cheers

Hope M4 Boxxer Caliper with mono lever Caliper has been stripped, cleaned and inspected then resprayed in navy blue. The Caliper it self is in very good condition and hasn't been fitted to a bike since being refreshed. Was going to replace the seals but after inspection found no wear don't leak. The mono lever needs a seal kit which can be bought from chain reaction cycles for £9.99 free postage as it leaks. As well as this the brake will need bleeding as it has no oil in it. I can do this all this for it aslong as the parts are paid for by the buyer. So If i am given an extra £15 I will rebuild the lever and bleed the brake. And it will be like new apart from a few scrapes on the lever Don;t really know what price to put for this so just going to put it on as offers for now.