samwright

Came off Orange Crush Pro 2020 Not much else to say really. Works fine. Specs Colour: Black Option: Rear Speed: 12 Speed

Came off Orange Crush Pro 2020 In good condition - not seen too much use. Specs Colour: Lunar Size: Max 52t Speed: 12 Speed

Came off Orange Crush Pro 2020 SRAM PG1230 NX Eagle 12 speed cassette Fits Shimano HG freehub 11-50t.

Taken off my orange crush pro 2020. BB is smooth, some wear and tear on the crank arms but all in all not bad condition. 32t 170mm length Will give you the BB as well, Crush I believe is a 73mm BB. Truvativ descendant crankset

Came off my Orange Crush Pro - really minimal use etc... No damage to the post or dropper - some small scratches here and there from general use as you would expect. Any questions please let me know. 30.9mm 440mm length with 150mm travel SDG Tellis Dropper Seatpost Specifications Travel:, 150mm, Diameter: 30.9 Rail Compatibility: 7x7mm & 7x9mm C/F Routing: Internal Only Lengths: 3440mm + Actuator 27mm Weight: 552g (30.9x150mm), 36g (Lever)

Selling due to due lack of use. These came off my Orange Crush Pro 2020. Very minimal use - some scratches here and there but no dents/buckles etc etc... Freehub runs smooth and bearings are fine. Front - 15mm x 110 Rear - 12 x 148 hub spacing WHEELSET: RIMS: WTB ST Light i30 Hubs: Strange Pro 27 hubs Doesn't come with the tires as shown in the photo's. Drop me a message to discuss shipping, if required.

Selling due to lack of use - see pictures for detail of condition. Bought the Crush Pro 2020 last April/May - hasn't seen extensive use but obviously has the odd scratches and marks but no dents or cracks. There's minimal chain rub as I used a protector from new and some gear/seatpost cable rub but its more light scratches than wore through the paint - see pictures for better detail. Not much else to say really, the frame will come with the following: Strange branded seat clam (bolt); Rear Axle; and FPD 44mm headset (suits taper). Picture show's crank set and bb attached but I forgot my 8mn wrench when I was taking it apart. Will ship to UK mainland, please drop me a message to discuss. Any questions just ask. Tech specs below: CRUSH GEOMETRY 6061-T6 Custom Butted OS Aluminium Tube Frame Size L Frame Size L Seat Tube Length 18" A. Head Angle 64° B. Seat Angle 73.5° C. Top Tube 630 D. Effective TT 640 E. BB Height (axle diff) -48 E. BB Height (from ground) 310 F. Chainstay 430 G. Head Tube 120 H. Wheelbase 1221 J. Reach 453 K. Stack 629 Standover 705 Stem Length 50 Unless otherwise indicated all measurements are in mm. Frame angles are measured static, without rider sag. Bottom bracket height from ground is with 710 mm Ø tyre. TECHNICAL INFO FORK TRAVEL OPTIMUM MAXIMUM MINIMUM 150 mm 150 mm 150 mm Rear Hub 148x12mm Bolt-through Seatpost Ø 30.9 mm Seatclamp Ø 34.9 mm BB Shell 73mm ISCG 05 Tapered Headset Upper: ZS44/28.6 Lower: EC44/40

These came off my Crush Pro 2020, only selling because I have recently rebuilt my full sus and I don't ride enough to warrant having two bikes. Fox Performance 34 Float 150mm 27.5 No damage to the sanctions etc... few chips and marks around but see the photo's for more detail. The bike and forks were hardly used much so its in great condition - doesn't need a service. Forgot to measure the steerer - will update. Any questions let me know.