sczapiga

Selling my wife's Medium Blur LT Carbon mountain bike. It is a 2010 model that she purchased brand new in September 2011 from the shop I worked at. She bought it in hopes of getting into mountain biking, but doesn't have the time to ride. She took it on a 3 day Tahoe MTB trip and about 10 other local MTB rides in total. When you see the bike it is obvious that other than some dust it is nearly unridden. The bike has been more than well kept and shows no wear on any of the drivetrain or other components. The tires are original and still probably 98% good. If you would like to check it out please let me know through email or if you have any other questions. Specs: Frame: Medium Santacruz Blur LT Carbon Fork: Fox 32 Talas FIT RLC tapered steerer Shock: Fox Float RP23 Wheels: 26" DT XR400 rims laced to a DT 340 rear hub and Chub carbon front hub Tires: Maxxis Crossmark 2.1 Drivetrain: Shimano XT M770 3 x 9 Shifters: XT M770 Front and rear derailleurs: XT M770 Chain: KMC 9 speed Brakes: Avid Elixir CR 160mm rotor front and rear Seatpost: Crank Brothers dropper post Stem: Easton EA70 Bar: Easton Monkey lite XC Carbon 31.8 (uncut) Saddle: WTB Silverado I put clear helicopter tape in high cable rub areas to protect the finish. There is only one scratch that I found and its near the rear derailleur hanger on the seat stay, it is cosmetic and is probably from putting it on a bike rack.

Im selling my 2004 Diamondback Supermoto XTS frame with a few extra bits to go along. The frame is in perfect shape other then a few small cable rub and shoe rub marks. I covered most of the tubes with 30mil clear helicopter tape to protect them from being scratched. The specs are as follows: Frame: 2004 Diamondback Supermoto XTS Top tube length: 23.5" center to center Seat tube length: 21" center to top of ST collar Head tube diameter: 1 1/8" Seat tube diameter: 27.2 Rear spacing: 135mm standard QR or 10mm bolt on Frame comes with a alloy seat post, Selle Italia Flite seat, FSA Pig DH headset, Shimano front derailleur, and a Romic shock. I also have a Fox Vanilla rear shock that needs a preload nut (adjuster for the spring) i can throw that in too. Please feel free to email or call me with any questions. Sorry fork is sold.

Selling my 2005 Manitou Dorado MRD fork. The fork works great and has been well kept, I just built a Nomad with a 36 so I don't have a need for the fork or this frame anymore. The springs are the stock medium springs and it has the direct mount stem with two different height stem riser blocks. There are a few minor scuffs, but, the stanctions are in perfect shape with no wear and they have never been crashed hard. I think they could probably use a oil change just because of amount of hours on them, however, the performance is great the way they are! I am also selling the Diamondback Supermoto XTS Large frame with the fork or separately. Feel free to email me or call me with any further questions. Fork steerer length: 7 7/8" long Axle: 20mm Travel: 7" Carbon and aluminum construction