sierracossie

Front wheel 15×110mm boost. 200mm Sram rotor, Specialized Butcher grid trail 29x2.3 tyre. Rear wheel 12x148mm boost DT Swiss 350 hub, Sram XD freehub, 180mm Sram rotor, Specialized Butcher grid trail 29x2.3 tyre. Both set up tubeless. Rear has slight buckle and flat spot but still runs fine and holds pressure.

OneUp, Dropper Post-V2, MMX lever, 34.9

Fox 34 Performance Elite 140mm 29",27.5+" boost 15x110mm. Was Invisiframed after one ride hence mark on decal shown in picture. Tapered steerer 1/1.8-1/1.2 cut to 190mm

Frame is a warranty replacement and is less than 6 months old. Has been Invisiframed from new. Comes with Fox DPS Performance Elite rear shock giving 130mm of travel. Frame size is Specialized S4 size, equivalent to large. At 5'9.5" I found it very comfortable. Comes with seat clamp, chain guide, swat bag, headset parts (contained in swat bag) and swat tool.

2022 Specialized Stumpjumper Evo comp carbon S3 (medium) Satin Doppio Although this is a 2022 model. It is actually less than a year old and the only difference between this and the current model. Is this is full 29er and not 29/27.5 mullet. Frame and fork have been Invisiframed from new and there are no marks at all on either. Any slight marks are purely in the invisiframe. Bike is standard apart from the custom fork decals courtesy of Slik Graphics. Frame FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel SWAT Increased-volume SWAT™ Door integration with 22oz SWAT™ Bladder Rear Shock FOX FLOAT X Performance, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSR adjustment, S1:210x50mm, S2-S6:210x55mm Fork FOX FLOAT 36 Rhythm, GRIP damper, two position Sweep adjustment, 15x110mm QR axle, 44mm offset, S1: 150mm of travel, S2-S6: 160mm of travel Stem Alloy Trail Stem, 35mm bar bore Handlebars Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm width Grips Specialized Trail Grips Front Brake SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm Centerline Rear Brake SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm Centerline Rear Derailleur SRAM NX Eagle, 12-speed Shift Levers SRAM GX, trigger, 12-speed Cassette Sram XG-1275, 12-speed, 10-52t Chain SRAM NX Eagle, 12-speed Crankset SRAM X1 Eagle, DUB, 32T, S1: 165mm, S2-S5: 170mm, S6: 175mm Chainrings 32T Bottom Bracket SRAM DUB, BSA 73mm, Threaded Rims Specialized 29, hookless alloy, 30mm inner width, tubeless ready Front Hub Alloy, sealed cartridge bearings, 15x110mm thru-axle, 28h Rear Hub Alloy, sealed cartridge bearings, 148mmx12mm thru-axle, 28h Front Tire Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3 Spokes DT Swiss Industry Rear Tire Butcher, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3 Saddle Bridge Comp, Hollow Cr-mo rails, 155/143mm SeatPost X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SLR LE lever, 34.9, S1: 100mm, S2: 125mm, S3: 150mm, S4/S5: 175mm, S6: 190mm Seat Binder Alloy 38.6mm Pedal NOT INCLUDED Viewings welcome Advertised elsewhere.

This was a 2023 Specialized Stumpjumper Expert S4 owned from new. Frame was replaced under warranty less than 6 months ago for the S-Works. Rear hub has been replaced under warranty only 2 months ago. Frame and fork have been Invisiframed from new. Few minor marks from use but no damage or defects present. Frame FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, flip chip Head Tube/Bottom Bracket adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel Rear Shock FOX FLOAT DPS Performance Elite, Rx Trail Tune, EVOL Air sleeve, 3-position adjustment w/ Open Mode Adjustment, 190x45mm Fork FOX FLOAT 34 Performance Elite, GRIP2 damper, 15x110mm, 44mm offset, 140mm of travel Stem Alloy Trail Stem, 35mm bar bore Handlebars Specialized Trail, 7050 alloy, 8-degree backsweep, 6-degree upsweep, 30mm rise, 770mm, 35mm clamp Grips Ergon Saddle Specialized Front Brake Shimano XT 4-piston caliper, hydraulic disc, 200mm Rear Brake Shimano XT, 4-piston caliper, hydraulic disc, 180mm Rear Derailleur Sram GX Eagle, 12-speed Shift Levers SRAM X01 Eagle, trigger, 12-speed Cassette SRAM XG-1295 Eagle, 10-52t Chain SRAM GX Eagle, 12-speed Crankset SRAM Descendant 7K, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm Chainrings Alloy, 30T Bottom Bracket SRAM DUB, BSA 73mm, threaded Rims Roval Traverse 29 Alloy, 30mm inner width, hand-built, 2Bliss Ready Front Hub Roval, sealed cartridge bearings, 15x110mm spacing, 28h Rear Hub Roval DT Swiss 350, Ratchet LN, SRAM XD driver body, 12mm thru-axle, 148mm spacing, 28h Spokes DT Swiss Competition Race Front Tire Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 29x2.3" Rear Tire Butcher, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3" SeatPost OneUp, Dropper Post-V2, MMX lever, 34.9 (S1:120mm, S2/S3:150mm, S4: 180mm, S5/S6: 210mm) Seat Binder Alloy, 38.6mm Viewings welcome Advertised elsewhere