smalthey

Local pickup is available. If you aren't in Vancouver, please DM me with your address so I can calculate shipping (or estimate it yourself at https://www.canadapost-postescanada.ca/cpc/en/tools/find-a-rate.page for a 50 gram 22x15x1cm package). Being made of plastic, it is not uncommon for the Lever Piston Guides in the Shimano XT brake M8000 lever to break or wear out. These individual parts are not available separately by Shimano, so this is an alternative to purchasing a complete replacement lever. These *may* fit the SLX M7000, but I haven't checked. $10 is for either left or right set. Let me know which one you want, or if you want both (for $20). This product is made with an extremely strong and resilient resin plastic. They have been tested in heavy use for over a year. This is 3D Printed from a model I drew/developed over many iterations to get it perfect. Please do not ask me to email it to you. Included are 3 replacement parts for a single lever: the top guide, the bottom guide, and the free-stroke adjust lever. While you must replace both the top and the bottom pieces at the same time, replacing the free-stroke adjust lever is optional. Instructions on how to rebuild the brake lever are available here: https://nuxx.net/blog/2020/10/25/rebuilding-shimano-slx-bl-m7000-brake-levers/ https://www.youtube.com/watch?v=Z43tGeGkYec https://www.youtube.com/watch?v=d7L9FARVDRU

Cranks are beat up but in WORKING condition. Comes with a (used) 28T NSB Chainring. I have a 30T that I can swap it out with if you prefer that (or buy it too! ;-). Requires a GXP Bottom Bracket (I have a new one for sale if you use pressfit).

Note that this is Pressfit (unthreaded), for older GXP cranksets (22mm Diameter Spindle on the non-drive side, 24mm on the drive side).

Brand new, off of a crankset. Should also work with 12 speed.

As shown. Probably best used with a USED chain. Should also work with 12 speed.