spicytuna
- Member since Oct 9, 2005
- Male / 53
- Toronto , Ontario
- 1 Followers
- 3 Trailforks Points
Recent
Selling
Nov 10, 2021 at 17:14
Nov 10, 2021Custom wheelset w/ Chris King Hubs
$150 CADSelling a custom wheelset composed of :
- Mavic 819 (Disc) Rims
- Chris King (sliver) front and rear hub
- One front Salsa QR skewer
- Shimano 9 ring cassette. (I believe it was a Shimano XT)
- Kenda Nevegal tubeless tires
Can't remember how old this setup is but I'm guessing around 12 years old. Although it never saw a lot of use, it's been sitting in my garage for the last 10 years. Hubs could use a cleaning and possibly a rebuild.
Priced accordingly.
Selling
Apr 20, 2020 at 17:19
Apr 20, 2020Shimano M8000 XT Front
$50 CADSelling a Shimano M8000 XT front brake and caliper.
Hose length is 91cm.
Brake was used for maybe 6 rides. However, the brakes may have a sticky piston since I was getting a squeal from my rotors right from the start.
Unfortunately, the bike it was installed on was sold (after restoring its original brakes) so I didn't have a chance to troubleshoot further.
Prefer local pickup but will consider shipping locally at buyers expense.
Selling
Apr 20, 2020 at 17:03
Apr 20, 2020SRAM Guide R
$140 CADSelling a complete set of 2019 SRAM Guide R four piston brakes.
Came off of my 2019 Yeti SB5 after around 20 rides.
Due to the internal routing of my Yeti, I was forced to cut the rear hose so that'll have to be re-attached. Connecting hardware is included but you'll need to buy an olive and bleed the rear caliper/lever.
The front hose is 29" (73cm)
The rear is 55" (140cm)
Comes with a 180mm rotor as well as a 160mm rotor along with all bolts.
Prefer local pickup but will consider shipping locally at buyers expense.
Ken.
Selling
Feb 16, 2020 at 14:12
Feb 16, 2020Norco Bigfoot 6.1
$1000 CADSelling a used Norco Bigfoot fatbike.
Specs can be found here :
https://www.norco.com/bike-archives/2016/bigfoot-61/
- Handle bar was upgraded to a Easton carbon bar.
- Brakes were just upgraded to SLX brakes 2 rides ago. (Brake pads haven't even been broken in yet.)
- Currently fitted with Gripstudded 45NRTH Flowbeists in the front and Gripstudded Surly Nates in the rear.
- Will also throw in a pair of Schwalbe Jumbo Jims which came with the bike.
Bike was purchased by myself in the summer of 2017. Since then, bike has been used maybe a dozen times per season.
No issues mechanically but once the original Avid brakes started to lose power, I decided to replace them with SLX's rather than bleed them.
Bike has been great but need to clear some space for new toys!
Currently located in Canmore but could possibly meet in Canmore or in between.
Selling
Jul 24, 2019 at 10:12
Jul 24, 2019Raceface Aeffect R
$30 CADSelling an Aeffect R handlebar which came off my Yeti SB5 with around a dozen rides.
Pretty much in brand new condition.
Bar diameter is 35mm. Width is 780mm.