sponge1990

1 - Semenuk 2 - Sorge 3 - Godziek

Traxmtb.com This is what you all need, toes upto 100kg Done

@Konda: the whole point of having a seat tube with an angle of 74 ish (the same on mtb road everything except TRI bikes) is so that you can have correct leg extension and correct knee placement when your cranks are level. As you get taller you need to get you seat back further as surprisingly extra height comes from your upper and lower leg. the reason the seat tube has an angle of 66.3 is becasue thats the angle of the seat post, however if you measure it from the center of the BB like you would measure your saddle height and saddle set back from, it measures as an EFFECTIVE SEAT TUBE ANGLE of 74.5. if you look at pretty much any full sus mtb the seat tube is offset forward of the bb to allow for a shorter rear end. i think this should answer any doubt you have on the issue of seat tube angles. if not perhaps this might help https://www.bbc.com/bitesize/guides/zx9qh39/revision/1 . . . . . . . Mic drop.....

@Konda: you need to look at the effective seat tube angle! 74.5 is inline with most manufactures so before you start talking shit do your reading.....

Richie rude Martin mays Sam Hill Ravanel Corduria Winton