stealthyman9

46mm offset and currently set to 160mm travel, but can be adjusted between 120mm-160mm using included air shaft spacers. The steerer tube is cut to 7 3/4 inches. This fork is in great shape and only has about 400 miles on it. There are no scratches on the stanchions and only minor cosmetic wear on the lowers. If you would like more photos or information, send me a PB message.

Frame: 2017 Santa Cruz Highball, size large, aluminum, external cable routing Fork: Rockshox Sid RL 29'' Solo Air, 100mm, w/ remote lockout Wheels: WTB STP i19, Novatec hubs, 15x110mm boost (front), 12x142mm (rear) Brakes: Shimano XT m8000 2-piston Shifter: SRAM NX 11-speed Derailleur: SRAM NX 11-speed Cassette: Shimano SLX 11-42t 11-speed Handlebar: Race Face Evolve, flatbar, 720mm Stem: Race Face Ride, 31.8mm x 80mm, 6 degrees Seatpost: Race Face Ride, 27.2mm diameter Saddle: WTB Volt Everything is in great shape and ready to ride. I am selling due to no longer needing a cross-country bike. If you would like any more information or more photos, please let me know.

Frame is in good shape with some minor cosmetic damage (pain chips and scratches), mainly to the non-drive side chainstay as shown in the photos. All components are in excellent working condition. The rear rim has not been ground down. This bike was used a moderate amount a few years ago when I first bought it, but has been gathering dust ever since. I’m hoping there is someone out there that can get some good use out of this bike as it is a lot of fun and a perfect bike to learn trials moves with. Message me if you want to see more pictures or want more information. Frame and Fork - Frame: Inspired Element 24 - Fork: Inspired Element, Black Wheels - Front hub: Trialtech Disc, 32h - Rear hub: Trialtech Non-Disc, 32h - Chain tensioner: Trialtech Sport - Rims: Inspired Element, 24" - Spokes: Stainless PG - Tires: Kenda K-Rad 24 x 2.3" Brakes - Front brake: Avid SD7 Lever, Avid BB5 Caliper, 180mm Disc - Rear brake: Avid SD7 Lever, Avid SD5 V-Brake Drivetrain - Cranks: Truvativ Hussefelt, 175mm, Black - Front Sprocket: Truvativ 22T - Chain: KMC Z610 - Freewheel: Trialtech Sport 16T, (72 POE) - Pedals: Trialtech Race Platform - Bottom bracket: Truvativ Howitzer - Bashring: Truvativ Trials Seating - Saddle: Inspired Integrated, Black - Seatpost: Inspired Integrated - Seat Clamp: Inspired Steering - Headset: Trialtech, 1-1/8" - Stem: Trialtech Race, welded, 90mm x 25˚ - Grips: Trialtech Race Rubber - Handlebars: Truvativ Hussefelt

This is a size Large SC 5010 “S” carbon build kit with a few modifications. I installed a Works Components 1-degree angled headset, increased the fork travel from 130mm to 140mm, and swapped the stock Rockshox Monarch rear shock for a DVO Topaz. Additionally, the rear wheel has a brand new rim, spokes, and spoke nipples. The original rim was a bit too beat up so I just had this new wheel built up and it hasn’t even seen dirt yet. I also replaced the chain and chainring at the same time. The fork and shock have been regularly maintained. I just did a lower leg service on the fork and replaced the dust seals. Brakes and dropper post remote are freshly bled. The bearings in the lower linkage are brand new and the upper link bearings still have a lot of life left in them. I will include a full replacement set of bearings with the bike (for both upper and lower linkages), so when the time comes to replace them you’ll be all set. The rear hub bearings have also been replaced within the past year. The frame is still in great shape with some cosmetic damage (paint chips, cable rub spots, etc.) which you can see in the photos. I have ridden this bike a lot over the last 4 years but have tried to be as meticulous as possible in my maintenance, so it is still in great working condition and can hopefully give someone many more years of fun on the trails. If you want additional photos or more information, please feel free to message me. 2015 Santa Cruz 5010 v1, carbon C Fork: Rockshox Pike RC, 140mm Shock: DVO Topaz Rims: Race Face AR 25 (rear) and Easton AR 24 (front) Hubs: SRAM MTH 746 (rear) and SRAM MTH 716 (front) Brakes: Shimano SLX, 2 piston Seatpost: Rockshox Reverb Stealth, 125mm Shifter/Derailleur: SRAM GX 11-speed Cassette: SRAM GX 11-speed Cranks: Race Face Aeffect, 175mm Chainring: Race Face NW 32 tooth Handlebars: Race Face Aeffect, 760mm Headset: Works Components -1 degree Tires: Maxxis Minion DHR II 3C 2.3” (rear) and Maxxis Minion DHF 3C 2.3” (front)

Fully-rigid steel frame single-speed 29er (steel fork and frame). This bike is somewhat of a Frankenstein bike that I have been swapping parts on for the past few years. The frame and components are in good shape apart from some cosmetic wear (paint scratches, etc.). Brakes are Magura MTS disc brakes (160mm Avid rotors). Currently running 32 x 20 gearing but I will include 19 tooth and 18 tooth cogs to adjust the gear ratio to your needs. This has been a great bike but lately I have been spending all my riding time on my full-suspension trail bike and need to clear out some space. Message me if you want more photos or detailed specifications.