stevasaurus

Mavic 729 Hope Hub Wheelset (26") Black 26" Mavic 729 rims on gold hope hubs (disc brake only). These were bought second hand and used as winter wheels on my DH bike so do show signs of heavy use. There are a few large dents on the rear wheel as shown in the pictures and the freehub body has teeth marks from the cassette. Bearings all round are also rough and would benefit from being replaced and there is no rim tape on the rear. That said, these wheels may still have some life in them for someone who doesn't mind changing bearings or possibly someone looking for some hubs to transplant into a new wheel build. -Front wheel is 110x20, internal rim diameter 24mm, external rim diameter 31.5. -Rear wheel is 150x12 hub, internal rim diameter 29mm, external rim diameter 36mm. - Both wheels have custom rim decals which can be removed if required. - Weight is 5.6lbs / 2.5kg for the pair. Local collection preferred from Telford / Cannock / Stafford area. Any questions please ask.

Superstar XC430 Wheelset (26") Front wheel is a white 32 spoke Superstar XC-430 rim mounted on a black Superstar Switch 100x15mm hub (20mm adaptor also included). Disk brake only. Rear wheel is a white 32 spoke Superstar XC-430 rim mounted on a black DMR revolver 135mm QR hub. Disc brake only. One very minor dent on the rear (see pic). Not affecting performance and could possibly be pulled out. Other than that running nice and true, all bearings are sound and the freehub on the rear has just been changed do is brand new never been used. Internal rim diameter 17mm, external 24mm. Weight is 4.45lbs / 2kg for the pair. Local collection preferred from Telford / Cannock / Stafford area but could arrange postage (within the UK) for additional cost. Any questions please ask.

2007 Marzocchi Super-T RCV Fork (26") 26" dual crown fork (180mm) with 110x20mm hub spacing, compression and rebound adjust. The steerer tube is 1"1/8 (straight) and 230mm long. No star nut is fitted but happy to fit one if you're not planning to cut the steerer and one is required. Sale includes a 20mm QR axle. Weight with axle 7.5lbs / 3.4kg The fork feels plush and is in good working order with no marks on the stanchions and no leaks from the air chamber. Please be aware though that the rebound dial is seized. I'm sure a service would sort this out but suspect someone with more technical knowhow might also be able to get this working. All other dials work as they should. Cosmetically there is some damage to the decals, a few small scratches on the outside of the lower crown, and cable rub on the bridge and upper stanchion. (Please see photos). Local collection preferred from Telford / Cannock / Stafford area but could arrange postage (within the UK) for additional cost. Any questions please ask.

2010 Rockshox Boxxer Team (R2C2) Forks (26") Rockshox Boxxer 26" fork (200mm) with 110x20mm hub spacing, high and low speed compression, high and low speed rebound, and bottom out adjust. The steerer tube is 1"1/8 (straight), 160mm long, and has a new star nut fitted. Weight with axle 6.2lbs / 2.8kg Sale includes a 20mm Maxle Lite axle, high and low upper crowns, an extra set of ODI bolt on fork bumpers, and additional red and blue coil springs to help you set these up for your weight. For reference regarding springs... -Yellow: 63-72kg rider (currently fitted) -Red: 72-81kg rider -Blue: 81-90kg rider The fork is in great working order with no marks on the stanchions and all dials working as they should, however there is some cosmetic damage to the decals, around the dropouts, and on the bridge as you might expect for a used downhill fork of its age. (Please see photos) PLEASE NOTE For full transparency - this fork has been safely packed away for the last few years but looked to have leaked some oil from around the rebound dials when taken out of storage. I've since done a lower leg service with fresh oil and grease, fully stripped and cleaned the rebound dial assembly and there's been no sign of any further leakage since. Local collection preferred from Telford / Cannock / Stafford area but could arrange postage (within the UK) for additional cost. Any questions please ask.

2009 Da Bomb Bouncing Betty DH Frame (26") Reasonable condition for a much loved and well used DH frame of it's age. Please see photos and feel free to ask any questions. It has the usual scuffs and marks you would expect for an older downhill frame but still has plenty of life left in it for a beginner looking to get into DH on a budget or anyone looking to do a retro DH build. The suspension, linkage bearings and headset are all sound and the sale includes a Chris King headset, Hope QR seatclamp, 150x12 bolt through rear axle, PZ racing seatpost, spare mech hanger, and a Push Tuned Fox DHX4 shock with 400lb spring giving 9" of travel. This frame is for 26" wheels (150 x 12mm rear hub spacing) and was only ever sold in one size which Da Bomb listed as: 'Size: S-15.5” (C-C)'. It has an 83mm bb with ISCG chain guide mounts, takes a 31.4mm seat post, and has a straight 1" 1/8th head tube. Weight with shock, headset, seatclamp and axle is 14.35lbs / 6.5kg. The shock was an upgrade from the Manitou Swinger that came on these frames originally and was purchased from / tuned at / regularly serviced by TF Tuned. (As a guide regarding spring rates for this for this frame I weigh 70kg and a 400lb spring proved to be optimum for me). The frame and shock have been packed away in storage for the last few years but were buttery smooth on last use with all dials etc working as they should. PLEASE NOTE There is a small dent in the drive side rear seat stay, along with small compressions on either side of the down tube where the fork bumpers have made contact - please see photos. Please do ask any questions and ensure you're comfortable with this. Local collection preferred from Telford / Cannock / Stafford area but can arrange postage within the UK at buyers expense. Any questions please ask. (n.b. Last photo is just to give an idea what this looked like built up - sale is for frame only)