steve77

Hey, I have a 2009 Fox Vanilla RC2 here. I have owned this fork for about 2 years and I have babied it for the whole time. As you will see from the pictures it is in great condition and there are very few scratches. In addition, there are no cracks, dents or leaks. The stanchions are immaculate. The only noticeable marks on the fork are around the crown, where the headset race was installed as you will see from the pictures which is purely cosmetic. Other than that it looks pretty much brand new. I have mainted it by changing the oil regularly. The fork originally only had a rebound adjustment, but I had my bike shop install a compression cardtridge, which features high and low speed compression adjustments in addition to rebound. An extra firm spring was also added.The steerer tube is 7 1/4 inches long and 1 1/8" in diameter.Here are the specs: - 160mm of coil sprung travel - Rebound and Compression (High and Low speed) adjustments - Extra firm spring (yellow) - 1 1/8" diameter steerer tube - 7 1/4" long steer tube - 20mm Quick release axle system PM me with offers if you are interested. NO LOW BALLERS OR TRADES. Buyer pays shipping! Thanks for looking

Hey, I have a brand new Chris King 18T cog here. It has never been used or mounted on a bike. I have no use for it as it will not work with my gear ratio. So please pm me an offer if you are interested! If you have a new 12T or 13T chris king cog, I will be willing to trade. Note: buyer pays shipping and no low ballers! Thanks for looking.

Hey, I have a good condition rear wheel here. Its only been ridding for a few months and it has been sitting around ever since. The only issue is there is a dent on one wall of the rim as shown in one of the pictures. It does not appear to be major and has not affected the performance in any way. The wheel still runs true as the day the it was purchased. The hub is very smooth and was recently serviced. Apart from the dent, there are only a few nicks in the paint here and there, but for the most part the wheel looks new. The specs are as follows: Hub: Hope Pro 2 Trials (black) - Bolts were replaced with steel ones Rim: Mavic EX 721 (black) Spokes: DT Swiss Double Butted (2.0mm - 1.8mm) (black) Nipples: Brass (black) If you would like I can include several spacers, a lockring and a 16T cog for an extra $5. Thanks for looking.